Gender
Male
About
Location
Den Haag
Please tell us a bit about your UAV interest
APM2 board (using it now on a OctoCopter)
Activity Feed
"This topic can be closed.
THR_MAX is no option any more for my solution...
My fold... I didn't see yesterday that the last update from this WikiPage MAVParam was edited at 8th Sep 2011 !
So a lot of things are changed now.
Any way... Thanks to all…"
THR_MAX is no option any more for my solution...
My fold... I didn't see yesterday that the last update from this WikiPage MAVParam was edited at 8th Sep 2011 !
So a lot of things are changed now.
Any way... Thanks to all…"
Hello Guy's,With my Hexa (flying with APM2.5 V2.8.1) I need more power to lift the complete setup.(total weight is about 3Kg)Is it safe to set THR_MAX higher as 75% ?Or will this make some more risk to hold the Multi in level in Stabilize_Mode and…
"Hello Tom,
Yes that's the way how it works."
Yes that's the way how it works."
"I don't get a schematic at this moment.
But it's a easy setup with the RGB led's and the Nano connection.
Here some pictures from our self designed PowerBoard and the Led's:
I hope this will give a better idea.
Later I will come back with a…"
But it's a easy setup with the RGB led's and the Nano connection.
Here some pictures from our self designed PowerBoard and the Led's:
I hope this will give a better idea.
Later I will come back with a…"
"Hello Oliver,
I didn't modified the on-line sketch.
I've downloaded this .zip file: http://arducopter.googlecode.com/files/ArduCopter-2.7.3.zip
There you will get the complete ArduCopter 2.7.3. map with all the .pde files and other files.
In the…"
I didn't modified the on-line sketch.
I've downloaded this .zip file: http://arducopter.googlecode.com/files/ArduCopter-2.7.3.zip
There you will get the complete ArduCopter 2.7.3. map with all the .pde files and other files.
In the…"
"Hello Mell,
I found this in the system.pde:
#if CONFIG_RELAY == ENABLED DDRL |= B00000100; // Set Port L, pin 2 to output for the relay#endif
This is Digital pin 47
In the Eagle files I could find any connection to this pin !
I'm afraid…"
I found this in the system.pde:
#if CONFIG_RELAY == ENABLED DDRL |= B00000100; // Set Port L, pin 2 to output for the relay#endif
This is Digital pin 47
In the Eagle files I could find any connection to this pin !
I'm afraid…"
"I think your Roll/Pitch rate P is set to high !
I've used these PIDs for a Hexa setup, with a total weight from 3Kg:
I think you can start the Roll/Pitch rate P at 0.110 and go step by step higher."
I've used these PIDs for a Hexa setup, with a total weight from 3Kg:
I think you can start the Roll/Pitch rate P at 0.110 and go step by step higher."
"@ All,
I forgot to tell that we hopefully can let it work with a MavLink communication to our Nano or other Arduino based board !
If we understand that protocol better and it will work:
This will make it a lot of easier, because we don't need to…"
I forgot to tell that we hopefully can let it work with a MavLink communication to our Nano or other Arduino based board !
If we understand that protocol better and it will work:
This will make it a lot of easier, because we don't need to…"
"@ Oliver,
Thanks for your reply and good to hear you like this setup.
Here a small peace of the leds.pde code:
////////////////////////////////////////////////////////
static void RGB_FlightModes(void){ if (g.battery_monitoring == 3 ||…"
Thanks for your reply and good to hear you like this setup.
Here a small peace of the leds.pde code:
////////////////////////////////////////////////////////
static void RGB_FlightModes(void){ if (g.battery_monitoring == 3 ||…"
Hello All, First I will say, Great job guys (developers).And now....I like to show our setup with AdaFruit digital Navigation RGB-Led's: The cool thing with this setup is, each RGB-Led is separated to control.To let this work well, we decided to use…
