Gender
Male
About
Location
Tromsø
About Me:
Born in 1982, with education in electronics, signal processing and acoustics. From Northern Norway. Enjoys solving problems, making things and being outdoors.
Please tell us a bit about your UAV interest
Started building quadcopter in the autumn of 2012. Interested in aerial photography, FPV flying and mounting various sensors on the UAV.
Hometown:
Steigen
Activity Feed
"A quick follow-up, although the discussion has now moved on:
I contacted 3DR regarding the crashes described above, and they confirmed that the Pixhawk has an MPU6000 failure. They will be sending me a replacement. "
I contacted 3DR regarding the crashes described above, and they confirmed that the Pixhawk has an MPU6000 failure. They will be sending me a replacement. "
"Good idea, Staq. My original Pixhawk was purchased in September 2014. This one had a faulty accelerometer and was never flown. I received a replacement in January 2015, this is the board which I'm struggling with now. I'm able to arm, but there seem…"
"Hello Nils,
thanks a lot for looking into my logs. I think I can explain the RC in and gyro values:
- In the first flight, I took off, landed, and took off again. I think the odd "yaw in" values are due to me disarming and rearming the copter.
- In…"
thanks a lot for looking into my logs. I think I can explain the RC in and gyro values:
- In the first flight, I took off, landed, and took off again. I think the odd "yaw in" values are due to me disarming and rearming the copter.
- In…"
"Hello everyone,
I have had similar pre-arm issues with my Pixhawk, but I have also experienced two mid-air accelerometer failures leading to my quadcopter crashing. I thought I'd share the details and logs with the community, hoping that they will…"
I have had similar pre-arm issues with my Pixhawk, but I have also experienced two mid-air accelerometer failures leading to my quadcopter crashing. I thought I'd share the details and logs with the community, hoping that they will…"
"I recently had the same kind of problems with my TBS Discovery with APM 2.6. I had some success with dialling down the altitude P value (gives softer response to altitude input data), and also dialling down the vertical time constant…"
"I've had lots of weird problems with the MinimOSD, but they disappeared when I started using the 5V from the ardupilot to power both sides of the card. But I'm using a 12V 600 tvl camera..."
"I'm probably very late here, but I had similar problems and fixed them by enabling the "COMPASS_LEARN" feature, which calibrates the compass by using GPS data. Give it a try if you haven't yet."
