About

Gender

Male


Location

Owensboro, KY


About Me:

I have been tinkering with RC stuff for over 40 years. I have seen amazing leaps in the hobby. My first RC was a Jerobee McLaren MK8B car, Remember JeroBee ?? My first "fancy" radio was a Heath Kit 8ch single stick. built it myself.... them were the days.....


Please tell us a bit about your UAV interest

Currently flying Multi rotor stuff I have home built. Doing some FPV, filming and just having fun exploring the possibility of the technology.


Hometown:

Owensboro, KY.


Activity Feed

Michael Monti replied to Randy's discussion Copter-3.3 beta testing
"Just had a crash...  I'm not sure what happened, but it wasn't good. 
Let me try to explain a bit.  I have a quad, quite vanilla in design about 14in  MTM. Been flying it for about a year, its a good flyer. I have been flying the beta flightware…"
Sep 13, 2015
Michael Monti replied to Tawanda's discussion Minimal speed for Ardu Pilot mega 2.5 in ArduRover User Group
"I made this last year. top speed is about 0.5mph. Nav works well, just took some tuning.
APM nav controller with an Adruno custom mixer for controlling the 6 wheel steering and crabbing.  
Frame is aluminum towel bars and 3D printed plastic parts.…"
Jul 23, 2015
Michael Monti replied to Michael Monti's discussion Pixhawk/Tri motor setup question.
"Hey David
 This is an experimental frame setup that I saw on a FliteTest video and liked the redundancy of the design.
Its a work in progress...  The Tri is about 24 inch MtM with 2 extra motors very near the CG.
Motors are 850KVA  Battery is 6S…"
Jun 12, 2015
Michael Monti replied to Michael Monti's discussion Pixhawk/Tri motor setup question.
"Thanks David
 That was just what I was looking for.
It seems that the PixHawk works the same way. Servo plugs into out 7
 Cheers... "
Jun 11, 2015
Michael Monti posted a discussion
I have a Pixhawk with 3.3-rc5 setup on a Tri configuration. just about ready to maiden. I need to limit the movement of the Yaw servo. (a physical limit issue)Is there a Min/Max limit setting for the Yaw servo ?  Thanks for any help.
Jun 10, 2015
Michael Monti replied to heliboy's discussion new PIXHAWK APM will not do anything in Auto Mode in ArduRover User Group
"I had a similar issue on my first time setup..  My problem was resolved by reversing the throttle channel. 
I had the same symptoms, worked in manual, but no go in auto. It was steering, just no forward motion.
I don't know if this will help you or…"
Sep 21, 2014
Michael Monti replied to Steven McAdam's discussion Joystick in Mission Planner?
"I use the joystick for controlling my rover more then I use the radio.
It works well once you get everything dialed in. "
Sep 16, 2014
Michael Monti left a comment on ArduRover User Group
"Thanks for the reply Thomas.
I got it figured out.  I'm using a custom arduino based mixer. I had the throttle reversed. I adjusted my mixer and things look good now.
Cheers..  \o/"
Sep 14, 2014
Michael Monti replied to Michael Monti's discussion No forward speed in auto. What am I doing wrong?
"I got it working...  I had to reverse the throttle response.  
When I went to Joystick control, I found the throttle was backwards from my transmitter. 
 The rover has all wheel steering and I use a seedruino as a custom mixer.
Once I reversed the…"
Sep 14, 2014
Michael Monti left a comment on ArduRover User Group
"This is my first time setting up an APM,  
 I have everything working in "manual" mode good.
Throttle and steering respond to my radio and from the ground station joystick.
But when I go into "auto" mode, the steering is responding but I get no…"
Sep 14, 2014
Michael Monti posted a discussion
This is my first time setting up an APM,   I have everything working in "manual" mode good.Throttle and steering respond to my radio and from the ground station joystick.But when I go into "auto" mode, the steering is responding but I get no…
Sep 14, 2014