About

Gender

Male


Location

Orchard Park, NY


Please tell us a bit about your UAV interest

I currently have a Spektrum 8 radio w/AR8000 receiver telemetry combo (with temp and altitude sense) 3DR Hexa w/880 motors, 11/4.7 props, sonar, optical flow, 900mhz XBee Telemetry link with custom made cases, and a GoPro Hero2 onboard w/5.8ghz video link into the Mission Planner HUD via USB->video capture dongle.


Hometown:

Buffalo, NY


Activity Feed

Mike R. commented on Joshua Ott's blog post Thirty Days (#14): 12-rotor demo at Maker Faire 2013
"lol, then I'm in for 3.. :) Got some boulders and a small house to move.."
May 20, 2013
Mike R. commented on Joshua Ott's blog post Thirty Days (#14): 12-rotor demo at Maker Faire 2013
"Have you tested to see what weight this could safely lift in payload, other than batteries?"
May 20, 2013
Mike R. replied to Randy's discussion ArduCopter 2.9 / 2.9.1 released
"Having an issue maybe someone could assist with..
Hexa seems to randomly have throttle brownouts when flying (have seen in alt-hold, and loiter) where it's hovering fine at ~50% throttle, and volts/amps seems to drop for a moment, causing the hexa…"
May 12, 2013
Mike R. replied to Tono's discussion Shielding cables in ArduCopter User Group
"Another item - if you can get some solder flux (anywhere that sells solder) dip the tiny usb wires in it, then heat them up with the soldering iron until the flux sizzles - then add solder - that may help solve your issue with soldering the tiny…"
Apr 25, 2013
Mike R. replied to Tono's discussion Shielding cables in ArduCopter User Group
"While I've used usb cables run between my sonar and apm on my two hexa's, if you can't solder the wires, look online for a small quantity of shielded balanced microphone wire - it's good stuff as well for this purpose..

You may even want to check…"
Apr 25, 2013
Mike R. commented on Gary Mortimer's blog post Google chief urges action to regulate mini-drones
"It's interesting reading concerning his statement over on slashdot.."
Apr 14, 2013
Mike R. commented on Gary Mortimer's blog post Google chief urges action to regulate mini-drones
"Apparently he's suffering from "rich people issues" and "keep consumers out of my next revenue stream-itis"
Existing stalking/harassment laws generally cover his supposed concerns. If you can't set up a camcorder in your yard to spy on the neighbors…"
Apr 14, 2013
Mike R. replied to Randy's discussion ArduCopter 2.8 / 2.8.1 released
"I've just tried my hand at uploading a beta firmware release for the first time, and all went well, but...

After successfully connecting back to MP with usb, and going to the config tab, I get no radio channel input bars at all. When connecting my…"
Jan 12, 2013
Mike R. replied to Edgar Scott's discussion Will 2.9 have a "Fly by GPS flight mode" that can arm, take off, fly, land, disarm without changing modes? in ArduCopter User Group
"Without touching on the other items, I would think automatic arming when the unit gets a GPS lock would be dangerous to say the least.. It's a safety feature in that you have to be in one specific mode (so you don't forget what one you're in when…"
Jan 6, 2013
Mike R. commented on Marco's blog post Italian Enthusiasm - Above the Clouds Drone
"Marco - Wonderful video - Keep up the great work :)"
Jan 3, 2013
Mike R. commented on Marco's blog post Italian Enthusiasm - Above the Clouds Drone
"Cre8it, you might want to check your ignorance at the door - the poster isn't even in the US - The FAA has no oversight within his airspace.. And I think we're all in agreement that the FAA is busy with more important issues, instead of sitting…"
Jan 3, 2013
Mike R. replied to Stephen Roach's discussion AttoPilot voltage & current sesnor calibration
"Any update on your issue? There is no way you're going to fly with 10v powering the APM - it would burn up..

If you have set up your power system in the typical fashion, you should have a connector coming from your power dist. board that is a…"
Nov 20, 2012
Mike R. posted a photo
Getting ready to load 2.8 - Working bugs out of volt/amp sensor first..
Oct 22, 2012
Mike R. commented on Crispin's blog post Spektrum DX8 and AR8000 Failsafe setup
"Great post, Thank you! - I have a DX8 with a happy failsafe setup now.."
Oct 17, 2012
Mike R. commented on Luke Olson's blog post GoPro releases Protune firmware update
"Nice - Thanks for the post!"
Oct 9, 2012
Mike R. left a comment on ArduCopter User Group
"Welcome to the club Marty :)"
Oct 8, 2012
More…