Gender
Male
About
About Me:
photographer, pilot, model pilot.
Please tell us a bit about your UAV interest
I want to build an octocopter to carry my 5Dmkii to dizzy new heights. Currently proud owner of a nanowii/apm2 brained racer/acro flying disco light.
Hometown:
Somewhere in Germany
Activity Feed
"This is 1440*900
This is 1024*600.
Please consider using a format that can be easily read with legacy screens."
This is 1024*600.
Please consider using a format that can be easily read with legacy screens."
"I don't know why this HUGE picture of the hexa is necessary - even on my 1080p screen i have to scroll and scroll to finally find some content...The font sizes are way too big, the header is way too big - looking at it on a netbook screen or a…"
"Hi,
i am trying to increase the dampening mass of the board by mounting it to a rubber block the size of the APM. In my Setup (Graupner 12ch, APM, 10A SimonK, 2208 1100KV, 2500mAh 3S on a 20cm arm Warthox frame) it should not affect performance at…"
i am trying to increase the dampening mass of the board by mounting it to a rubber block the size of the APM. In my Setup (Graupner 12ch, APM, 10A SimonK, 2208 1100KV, 2500mAh 3S on a 20cm arm Warthox frame) it should not affect performance at…"
"Hi,
for me 2.9 is not working out at all.
1)There is a weird issue with the new leveling process. Whatever i do, the copter thinks that it is tilted after the process.
2)Starting the copter, one of the 4 motors sputters in low rpm, quad tilts,…"
for me 2.9 is not working out at all.
1)There is a weird issue with the new leveling process. Whatever i do, the copter thinks that it is tilted after the process.
2)Starting the copter, one of the 4 motors sputters in low rpm, quad tilts,…"
