Gender
Male
About
Location
NSW
About Me:
Model: 3D Robotics 2014 Quad Flight Control System: Pixhawk Software: Arductoper 3.2.1, Mission Planner 1.3.3 GPS: u-blox GPS with compass RX: Spektrum AR8000 Satellite TX: Spektrum DX7S Motors: 880kV BC2836-9 Propellers: APC 11x4.7 Battery: 4S 4500mah 35C FPV Battery: 3S 900mah 25C Data Link: RFDesign 900+ Gimbal: Tarot T-2D for GoPro Hero4 Silver Video TX: Immersion RC 25mW 5.8GHz Video RX: FlySight Black Pearl 32 Channel 5.8 Ghz 7" Diversity Monitor
Please tell us a bit about your UAV interest
CASA Certified Controller
Hometown:
Sydney
Activity Feed
"Hi Alex,
I think Thorsten might be referring to the ability to specify exactly which logs are enabled. This was possible through the CLI in 3.2.1 using the command as below:
http://dev.ardupilot.com/wiki/mission-planner-terminal/using-the-co..."
I think Thorsten might be referring to the ability to specify exactly which logs are enabled. This was possible through the CLI in 3.2.1 using the command as below:
http://dev.ardupilot.com/wiki/mission-planner-terminal/using-the-co..."
