Gender
Male
About
Location
Paris
About Me:
- Embedded systems consultant for the automotive/aerospace industry - Diy enthusiast - Based currently in France
Please tell us a bit about your UAV interest
- Advanced control laws - RF communications - Electronics
Activity Feed
"Hey Guys, thanks for showing your interest,I was extremely busy these days because I'm moving to a new flat.Final prototype has been built and fully tested exept the joystick usb control so I consider that HW is mature,SW has maked big progress but…"
"Thank you for sharing, Keep up the great work !"
"Wow !!! Great work !!!
Did you use the App note from microchip for the ESCs or did you developped your own code?
Are you flying with the IMU mounted like that ?"
Did you use the App note from microchip for the ESCs or did you developped your own code?
Are you flying with the IMU mounted like that ?"
"@ Steven G
If you are talking about this kit -> http://www.foxtechfpv.com/58g-400mw-vtxrx-p-550.html, there is nothing to do as I'm using a compatible one. The Tx of this kit is compatible with the built-in OpenGSU video receiver. Did you try it at…"
If you are talking about this kit -> http://www.foxtechfpv.com/58g-400mw-vtxrx-p-550.html, there is nothing to do as I'm using a compatible one. The Tx of this kit is compatible with the built-in OpenGSU video receiver. Did you try it at…"
"Very interesting technical problem !
I saw that a lot of people tried to overcome the problem by adding capacitance or getting a higher amp BEC with more or less success...
My 2cts is that a parameter have been neglected : the serial resistance of…"
I saw that a lot of people tried to overcome the problem by adding capacitance or getting a higher amp BEC with more or less success...
My 2cts is that a parameter have been neglected : the serial resistance of…"
"@Josh,
Building an All-In-One device is a matter of compromise as there are as many needs as users. The choice of 5.8Ghz is justified because it give enough range at a best price and good integrability at the most common quad/heli RC/UAV user as me.…"
Building an All-In-One device is a matter of compromise as there are as many needs as users. The choice of 5.8Ghz is justified because it give enough range at a best price and good integrability at the most common quad/heli RC/UAV user as me.…"
"@Jiro,
Thanks Jiro for your support ! For the data, RF transeiver will be an option and you can use any Xbee footprint compatible transeiver (with an U.FL antenna as it's inside an alu box), I'm pretty sure there is one for your country."
Thanks Jiro for your support ! For the data, RF transeiver will be an option and you can use any Xbee footprint compatible transeiver (with an U.FL antenna as it's inside an alu box), I'm pretty sure there is one for your country."
"@Thomas,
Obviously there is no "universal" receiver or transmitter, and as I said previously more details will follow and recommanded compatible tx list will be definitely part of it. I'm also thinking of a video transmitter as an option because…"
Obviously there is no "universal" receiver or transmitter, and as I said previously more details will follow and recommanded compatible tx list will be definitely part of it. I'm also thinking of a video transmitter as an option because…"
"Thanks guys for your support, obviously I will keep you informed of any progress!"
"Robert, it's possible to get it with some connectors unsoldered so you can adapt it to your need but for the video antenna it's much better to use this kind of cable RPSMA extension (custom lentgh)
For the other connectors, there will be always a…"
For the other connectors, there will be always a…"
"Robert, the oem version should be mounted parallel to the panel, you will need a surface of 120x75mm behind the panel and only a depth of 1" (25mm) so only forth of the depth of your pelican case. Please see the following very diy sketch out (the…"
"@Tom :
I'm still have to figure out some details that can impact the final price, but what can I say today is it will be under 300 USD."
I'm still have to figure out some details that can impact the final price, but what can I say today is it will be under 300 USD."
"@ Ivan & Peter :
Thanks guys !
@ Robert :
"Sounds like yours would allow a dual connection?" Yes, this is exactly the purpose of OpenGSU, MP and standalone GCS can work at the same time without collisions.
"The only question I have right now is how…"
Thanks guys !
@ Robert :
"Sounds like yours would allow a dual connection?" Yes, this is exactly the purpose of OpenGSU, MP and standalone GCS can work at the same time without collisions.
"The only question I have right now is how…"
I'm following this community regularly and I must say that I'm very impressed by all the job done and the good spirit. Congrats to Chris and all the team players! Some months ago, I started to build a ground station and I realised that an…
