About

Gender

Male


Location

Ontario


Please tell us a bit about your UAV interest

Hobbyist, possible commercial use


Hometown:

Sault Ste. Marie


Activity Feed

Nathaniel Tyson replied to Randy's discussion Copter-3.3 beta testing
"Oh I see, Seams like an odd thing to do to me, lose sensitivity at a critical phase of flight. But to each there own. Thanks for the response."
Nov 22, 2015
Nathaniel Tyson replied to Randy's discussion Copter-3.3 beta testing
"If you are in loiter/althold then the copter will attempt to hold altitude so you will need more throttle input to overcome the FCs attempt to hold altitude, this is how its supposed to work so nothing to fix. Out of curiosity why are you taking off…"
Nov 22, 2015
Nathaniel Tyson replied to Nathaniel Tyson's discussion Trouble with Storm32
"Sorry Ganesh, I just notice your post.  Did you get it to work? "
Nov 14, 2015
Nathaniel Tyson replied to rich's discussion guide me please to choose right flight control
"Sounds like you want a pixhawk clone. Try HobbyKing HKpilot32"
Nov 13, 2015
Nathaniel Tyson posted a discussion
help, I'm trying to run my Storm32 gimbal controller from my Serial 4/5 port but in mission planner I cant find any serial4_XX parameters. is there a way to enable the port? what have I missed?Thanks
Nov 13, 2015
Nathaniel Tyson replied to Nathaniel Tyson's discussion Trouble with Storm32
"Got it to work via the pins on the back of the hkpilot32"
Aug 15, 2015
Nathaniel Tyson posted a discussion
Hi all, I have a HKpilot32 and I'm trying to control pitch and yaw on a Storm32. I'm running 3.2.1. I looked at the wiki set up but but I don't have a setting for MNT_TYPE, so I can't set it to STorm32. I also noticed I'm missing the settings for…
Aug 14, 2015
Nathaniel Tyson replied to Nathaniel Tyson's discussion Pixhawk + gimbal without controller?
"this is the motor i'm trying to use, the have servo plugs instead of the standard 3 wire motor connection.
http://rctimer.com/product-1029.html"
Aug 6, 2015
Nathaniel Tyson posted a discussion
Can I use a gimbal with the Pixhawk without using a gimbal controler? if so can the pixhawk power the gimbal moters or do i power therm off my PDB?
Aug 6, 2015
Nathaniel Tyson replied to Nathaniel Tyson's discussion APM 2.6 acro roll
"Bump"
Mar 23, 2015
Nathaniel Tyson replied to Nathaniel Tyson's discussion APM 2.6 acro roll
"No ideas or advise, if you think of something I'll try it"
Mar 19, 2015
Nathaniel Tyson posted a discussion
Hi all,In acro mode when I move the sticks to roll, my tri copter will roll over on its back, level of inverted for a second or two then quickly roll back over. I have my sick hard over left or right during the manouver.Can anyone tell me why the…
Mar 15, 2015
Nathaniel Tyson replied to Nathaniel Tyson's discussion APM 2.6 battery monitor
"Think I found the problem, BATT_AMP_PERVOLT was set to 160, oops. Have to test fly to see that I've got it but it looks good on the bench"
Mar 1, 2015
Nathaniel Tyson replied to Nathaniel Tyson's discussion APM 2.6 battery monitor
"Thanks Stuart I think I set batt capacity, how do you make sure current sensor is calibrated?"
Mar 1, 2015
Nathaniel Tyson posted discussions
Mar 1, 2015