"Hi André.
Thanks for your kind words.
There are no plans at the moment to support other boards. Mavpixel is a codewise clone of Cleanflight LED strip functionality with Mavlink control and has all the same features and limitations, notably 32 leds…"

"Hi Chromic.
Great to hear it's working. I would love to see a photo of your setup.
Cheers,
Nick"

"Hi  Chromic. Thanks for trying Mavpixel. There could be a few reasons Telem 2 does not work. Take a close look at your SR2 parameters as described below. Please let me know how you go. Btw, what APM firmware are you using?

Debugging Mavpixel…"

"Yes, this isn't the first time I've used Jani's very nice jD-IOBoard code, just the first time I released anything I made with it.
I was intending to have Mavpixel be compatible with jD-IO but it soon became apparent there would not be enough flash…"

"Hi @Luis. Are you sure I should switch to #158? The Mavlink message set states: "Generic autopilot peripheral component ID. Meant for devices that do not implement the parameter sub-protocol." I do indeed support the parameter sub-protocol, 83…"

"Hi @Scott. Seems I need to take a closer look at your project, I did not realize it was configurable with the features you mention. A configurator script seems like a good idea. I love the Teensy, it is a great controller with oodles of features,…"

"Thanks Luis, I hadn't seen that project. It looks similar to Mavpixel but appears to have a different set of features, has fixed patterns and uses a somewhat more expensive controller.
I feel a 3.3 volt microcontroller is not ideal for running…"

"For anybody who is interested in more bling on their copter or plane I have made a simple external lighting controller that can be used with APM. It is based on the LED driver in Cleanflight and connects to a Mavlink serial telemetry channel.
It's…"

"I see this issue has been encountered by others and is being worked on, see https://github.com/diydrones/ardupilot/issues/2266. Hopefully the fix will make it into rc4."

"I appear to be unable to calibrate the accels, every time Bad AHRS and the horizon is wandering. Board and settings are working fine on 3.2.1.
My board (AUAV-X2) is installed upside down, and as the accelerometer is backwards I normally use…"

"It sounds like "Start up Failed".
See http://copter.ardupilot.com/wiki/common-apm-board-leds/
If you have other failed Pixhawks, I strongly suggest you review your wiring and connections before proceeding to ensure it is not something you might be…"

"You might be able to use the APM GPS passthrough to connect the bluetooth to the computer. Load the passthrough firmware into the APM and connect hc-06 to the GPS port on the APM.
Open the APM com port in Mission Planner terminal and start typing…"