Gender
Male
About
Location
Warsaw
About Me:
Photographer and archaeologist from University of Warsaw. Personal page: http://fotostacja.pl
Please tell us a bit about your UAV interest
building multirotors and using them for photography and photogrammetry
Hometown:
Warsaw
Activity Feed
"Hi is there anyone who is using vario voice from graupner mx20. It doesn't work corectly in my setup any idea why ?"
"Ok so I found how to disable "minimum altitude" in "fence alerts" min altitude must be set to OFF"
"It looks like that's not important message and it's safe to fly if it's not appearing during flight.
https://discuss.ardupilot.org/t/bad-gyro-health-in-new-copter-with-..."
https://discuss.ardupilot.org/t/bad-gyro-health-in-new-copter-with-..."
"Hi and another question. After take off I still hear "minimum altitude" message on my earphones from mx20. Does anyone knows how to disable that alert ?"
Hi I am building new copter based on pixhawk 2.1 and here+ gps. It will be quite big octo but for now it’s quad with 15" propellers. I have mission planner 1.3.52 and copter firmware 3.5.5. When I am connected to mission planner from time to time I…
"Is that normal that from time to time telemetry is 0000 and after one second it's showing data again ?"
Hi I am starting to build new octocopter based on Pixhawk 2.1. I have few years of experience in building and flying custom Mikrokopter copters. All advices are welcome ! What are the biggest differences between this autopilots ? I am sure that…
" When I will have same free time I will do the test ..."
"Yes but that's bigger weight and much bigger price for batteries I think ??? Are they better than tattu ? Do you have any link ? Can I have 12000 or 15000 batt in the same weight as tattu lipo ?"
"hover is 70-80A"
"yes"
"Octocopter weights about 13kg with camera and gimbal and batteries (2x10 000). It fly around 13 minutes."
"Thanks for answers. I did calculation in ecalc.ch and checked the documentation of the motors so I know that on such configuration on flat octo if I will change propellers from 16: to 18" I will get extra 1 minute of flight time. My problem are this…"
Hi I have quite big octocopter with flat frame cinenestar type with 16" propellers and t-motor u7 420kv motors. It has 120 cm frame size. I would like to change the propellers in it to 18" to have longer flight time. I can use longer booms but the…
"so RTK is used only for phototagging not for more better characteristics of flight of the copter?"
