Gender
Male
About
Location
Hyderabad
Please tell us a bit about your UAV interest
My hobby
Hometown:
Pakistan
Activity Feed
"In my opinion phantom is much reliable but you cant make any changes so easily.
Where as for apm as an open source you can make number of changes to fulfil your requirements.
But if you want phantom then go for phantom 2 not vision plus. It comes…"
Where as for apm as an open source you can make number of changes to fulfil your requirements.
But if you want phantom then go for phantom 2 not vision plus. It comes…"
"Thanks James for the clarification "
I have a brushless gimbal and BGC 3.0 MOS controller . I have burnt out my gimbal controller, so can i connect brushless gimbal servos directly to APM ? Any suitable advise would be appreciated
"Dear Michael
Thank you for replying, can you please explain this in little detail
optimize lift target for 1.15x weight at the most efficient arc for your motor/prop combo."
Thank you for replying, can you please explain this in little detail
optimize lift target for 1.15x weight at the most efficient arc for your motor/prop combo."
"Thank you Dave for the reply.
Can you please guide can i continue my 3s battery setup and ESC if i change to 500kv pancake motors and 15" props ? "
Can you please guide can i continue my 3s battery setup and ESC if i change to 500kv pancake motors and 15" props ? "
My quadcopter is V type frame.Motors Emax 2213 / 935KV / 1045 propsSlightly soft props, not much like phantom but they are not rigid 4000 Mah 3s LipoAPM 2.6total weight of quad copter = 1600 gramsgiving only 9 ~ 10 mins in a no wind condition and…
"Thanks Andre K. for the reply.
I have 3dr radio installed thats how i can see live stats.
I guess voltage failsafe is much better than Ah"
I have 3dr radio installed thats how i can see live stats.
I guess voltage failsafe is much better than Ah"
Hello,I need to set failsafe on battery current, I have set it to 300mah but when i see the battery current before arming the battery current is showing 0.40 Amps and when i arm the copter and increase throttle then the current showing is 14 - 15…
Hello AllI am new to the quadcopter hobby and also to this forum.I assembled quad copter with APM 2.6 (external compass) and Spektrum DX7sCurrently i have 5.8GHz (200mw) FPV that came up with 3DR kit but the smooth range is not more than 500m.I have…
"I am also new to this hobby :)
but recording video from AV source is something i have worked alot
The cheapest and good solution is to buy a USB TV tuner (i used DANY U1050)
It came up with a CD with TV home media software,
then simply plug your…"
but recording video from AV source is something i have worked alot
The cheapest and good solution is to buy a USB TV tuner (i used DANY U1050)
It came up with a CD with TV home media software,
then simply plug your…"
After visiting forums, blogs and wikis i have setup my quad copter using APM2.6 and external compass. After spending countless hours and a leg broken now my quad can fly smoothly.I have setup my Spektrum Dx7s to work with my quad but only for 3…
