About

Gender

Male


Location

Västmanland


About Me:

My name is Oskar Findahl and i live in Sweden. I am a professional freeflyer in class F1A and F1B. And a RC pilot.


Please tell us a bit about your UAV interest

I fly a lot of FPV and other rc stuff and i am striving to make an UAV in a neraby future.


Hometown:

Norberg


Activity Feed

OzCaGrr commented on OzCaGrr's blog post My first Blog post on DIY Drones!
"Well there has got to be someway to fly at high altitude without breaking the law. Were ore who should you go to? I mean it is not like the whole airspace were i am flying at is jammed with aircraft. And i wan't to fly high so if i need to get…"
Nov 11, 2011
OzCaGrr commented on OzCaGrr's blog post My first Blog post on DIY Drones!
"Here are some more pictures:
 

 
Good room for all the electronics. 
 

Connector for video transmitter. 
 
Video transmitter inside the wing.
 

 

 
GoPro camera pan and tilt mount.
 
Battery compartment.
 

 

 "
Nov 6, 2011
OzCaGrr commented on OzCaGrr's blog post My first Blog post on DIY Drones!
"Stefan Olofsson - Sure i can put some up a bit later :) 
 
Steve Smetters - Well we do not have any local rules in our club about flying in clouds and everybody knows about my flying both RC and Full scale pilots so if they would think of it as a…"
Nov 5, 2011
OzCaGrr left a comment for tshado
"Hi Tshado!
Yes i can help you build your own Dr.Marten just tell me what you need the details for.
 
Best regards "
Nov 5, 2011
OzCaGrr commented on OzCaGrr's blog post My first Blog post on DIY Drones!
"I know that there is a risk of a collision and that if it would to happen the consequences would be catastrophic. But i do also have a good knowledge of the full scale airplanes around here and i try to avoid flying with them unless i make…"
Nov 5, 2011
OzCaGrr commented on OzCaGrr's blog post My first Blog post on DIY Drones!
"@GrzegorzSz - around 2000 m at most if i remember right. 
 "
Nov 4, 2011
OzCaGrr commented on OzCaGrr's blog post My first Blog post on DIY Drones!
"Thanks everybody! 
@Stefan - My goals with the design of the plane was to have a plane that is light weight and with a big surface area to get the maximum amount of flying time. The airplane empty weighs around 350-400g and with all the electronics…"
Nov 4, 2011
OzCaGrr posted a blog post
So this is my first post and i thought that i would share my FPV video with you guys!  A little bit of information:Video: 1,2Ghz 800mw and 8 dBi patch antenna.Radio: Futaba 12FG with 1W WiFi booster and 12 dBi patch antennaAirplane: My own design…
Nov 3, 2011