Xmas Cleaning.
APM 1.4 + 2560 + mediatek GPS = $120
plugged it in to pc and it registers and works. i havent since i brought the brand new gps and 2560 upgrade i havent had a chance to use it on a model. ive moved onto other controllers also.
also selli
Read more…I did it, finally the hexa is ready for a tune! its taken its sweet time, over 2 months of waiting and building and lots of $$$ but im excited to take it for its maiden flight real soon. my intention of using this hexa was for aerial video with futur
Read more…Hi all,
im interested in charging multiple lipo's at the same time for quicker fly times of course :)
any one have any recommendations for
1) best lipos to use (weight vs flight times, weather it be 3s or 4s)
2) charger or charging leads for multiple c
Read more…ok so just flew 2.0.42 today.
1. why doesn't alt hold work anymore? (everything checked out during my setup)
2. if im running a Turnigy nano tech 2650mah 3S 35-70C, should i be getting longer flight times than 5mins? (stock arducopter with batt - quad
Read more…i would like to diagnose the apm board for baro and compass issues, would anyone know more about this?
FYI - why im addressing because in terminal baro show no values and compass values do not change.
thanks to the super duper dude to tell me because
Read more…Hey guys,
back at it again and i see .42! awesome.
does anyone know if there is a bug in mission planner when you jump into terminal and test command "altitude" or "compass" do they work?
when i do it, i see no values. do i have a hardware issue or i
Read more…hi all,
just go myself a x468 camera rig. 2 servos for roll and pitch. i run a turnigy 9x and my flight modes are setup up to AUX CH5 in radio. that would mean i cannot have the camera servos in CH OUT 5 right, if so where would i plug it? also i can
Read more…I have an original jdrones build with the magnetometer with cable. If I want to use method 1 by taking out cable and putting directly on board with pins do I need to change any settings in the magnetometer or apm? Or is it straight forward pull plug
Read more…Hi all, yes, finally i can post up a video.today i was really excited to fly the stable 2.0.38! had an awesome flight for about 45mins with various of batts.i was game enough to try RTL, Loiter and ALT hold but ended up in a crash! well RTL only but
Read more…Not sure if this has been a discussion previousy, most likely but, any of you would know the best solution for fpv in Australia? I own a jdrones quad. Now that the code is much more usuble and stable i actually have the courage to have some fun with
Read more…Hey guy,
just uploaded 2.0.37 but now in terminal when i go to test pwm or sonar or anything at that nothing is a live feed, it only just gives one line and prompts again. previously i know it would just give a live feed. is my board faulty or bug in
Read more…Hey guys,just recently purchased a pre made arducopter and havent yet flown it. only couple days ago i installed and configure the copter with mission planner. everything went well thanks to jani's videos, however i noticed when i select the MOTOR fe
Read more…hi all,
2 issues, i think?
im reasonable new to rc and especially to the arducopter. i recently purchased the premade, ready to fly arducopter. i have plugged in my frsky 8 channel to the drone, plugged in lipo and all sounds and lights turn on. i have
Read more…