Gender
Male
About
Location
Huntly, Victoria
About Me:
GIS professional and Cartographer, ex military survey now in public utilities sector
Please tell us a bit about your UAV interest
Inspired by some of the excellent FPV footage and need a hobby that can utilise FPV and aerial photography
Hometown:
Sale
Activity Feed
"I have just ordered this:
ReadyMadeRC EzCAP"
ReadyMadeRC EzCAP"
"Communication is done thru telemetry radios, one Air module that plugs into APM and one Ground module that plugs into computer with Mission Planner"
"I made the splitter cable from a female servo cable, worked very well.
Just strip back 5mm plastic shielding between APM and 3DR plugs and solder in the splitter cable. Before soldering slide 12mm heatshrink tubing onto each cable being soldered.…"
Just strip back 5mm plastic shielding between APM and 3DR plugs and solder in the splitter cable. Before soldering slide 12mm heatshrink tubing onto each cable being soldered.…"
"Angus, yes you do need to add pins and cut a hole in the case.
However, you can also add a splitter as suggested.
I just think adding the pins was more elegant.
I have another apm 2.5 I'll wire that one with a splitter.
As far as I know you need to…"
However, you can also add a splitter as suggested.
I just think adding the pins was more elegant.
I have another apm 2.5 I'll wire that one with a splitter.
As far as I know you need to…"
"See comments in this post
use-osd-telemetry-at-the-same-time
"
use-osd-telemetry-at-the-same-time
"
"I agree"
"Hi Everyone, live near Bendigo. Still building APM 2.5 plane and a quad as well as learning to fly."
"Great video. Good location for shoot."
