About

Please tell us a bit about your UAV interest

I have one!


Hometown:

Toronto


Activity Feed

Pyr8 posted a discussion
Has anyone got a modified 9XR working with MAVLINK on ArduCopter 3.2.1 with HobbyKing OrangeRx TX & RX flashed with Gitsly branch of OpenLRSng? I set the 9XR & TX all to 115200 as well as set the SERIAL1_BAUD to that of SERIAL0_BAUD @ 115200 (I…
Sep 22, 2015
Pyr8 replied to Gábor Zoltán's discussion Adding extra functions to MinimOSD
"Do you have any idea how to change the "BAUD" rate within MinimOSD?"
Sep 20, 2015
Pyr8 replied to Gábor Zoltán's discussion Adding extra functions to MinimOSD
";)"
Sep 19, 2015
Pyr8 replied to Gábor Zoltán's discussion Adding extra functions to MinimOSD
"Thanks Nathaniel,

I will let you all know (Minus Steven G) ;) , once I get the hardware and flash the firmware, etc."
Sep 19, 2015
Pyr8 replied to Andrew Dankers's discussion MAVLink data displayed on OpenTX (9X/9XR/etc) radio screen via OpenLRS, plus telemetry pass-thru to PC
"How do you compile the firmware for gitsly's branch of openLRSng?"
Sep 19, 2015
Pyr8 replied to Gábor Zoltán's discussion Adding extra functions to MinimOSD
"Anyone,it's only been 8 days since my last post!!!"
Sep 19, 2015
Pyr8 replied to Andrew Dankers's discussion MAVLink data displayed on OpenTX (9X/9XR/etc) radio screen via OpenLRS, plus telemetry pass-thru to PC
"I got the main board figured out, now just need some clarification on the TX version I have as per photo and weather or not is requires modification for bi-directional MAVLink?!"
Sep 17, 2015
Pyr8 replied to Andrew Dankers's discussion MAVLink data displayed on OpenTX (9X/9XR/etc) radio screen via OpenLRS, plus telemetry pass-thru to PC
"Hello Andrew,

I am in desperate need of help getting my 9XR & HobbyKing Orange RX LRS module working with MAVLink (No FRSky!).

So far I have soldered the 2 x 220 Ohm resistors to the main board of the 9XR as per:


However, there is a second…"
Sep 16, 2015
Pyr8 replied to Gábor Zoltán's discussion Adding extra functions to MinimOSD
"Two questions:

1. What are the latest "Copter" pre-release revision numbers for "character set", firmware, etc?

2. Will "2.4_r791.hex" & "MinimOSD_2.4.0.1" work with the new "MICRO MINIMOSD""
Sep 11, 2015
Pyr8 replied to Gábor Zoltán's discussion Adding extra functions to MinimOSD
"You hit the nail on the head!!!!!!!!!!!!!!!!!!"
Sep 11, 2015
Pyr8 replied to Gábor Zoltán's discussion Adding extra functions to MinimOSD
"Bom dia Miguel, eu espero que tudo esteja bem!

I have not updated my MinimOSD since this post back in June 2014 and was wondering if 2.4.0.2 & R800 Copter are stable, or should I be using a different build?

Obrigado!"
May 15, 2015
Pyr8 replied to Gábor Zoltán's discussion Adding extra functions to MinimOSD
"Miguel,

What is the latest stable version of Copter?

Thanks!"
Sep 3, 2014
Pyr8 commented on Scott Berfield's blog post Adding External LED Indicators and a Piezo Beeper for Arm and GPS Status
"I am having an issue after a fresh firmware install on my APM 2.x with my external LED's not flashing on low battery.

"Disarm" flashes as it should and goes solid on "arming", however it will not flash on low battery. I have confirmed the…"
Aug 7, 2014
Pyr8 commented on Lukasz's blog post APM RSSI 3.3V input
"What voltage 10uf capacitor is best....16v?"
Jul 17, 2014
Pyr8 replied to Gábor Zoltán's discussion Adding extra functions to MinimOSD
"Thanks Miguel,

It looks like I had several issues. After trying your suggestion of powering both sides of the OSD, I kept on getting the following errors:

"Failed to talk to bootloader""The EEPROM mapping is outdated! An automatic update will…"
Jun 3, 2014
Pyr8 replied to Gábor Zoltán's discussion Adding extra functions to MinimOSD
"It just occurred to me, is there a specific "order" in which to flash both the firmware and the character-set...ie, firmware first then CS?"
Jun 2, 2014
More…