Please tell us a bit about your UAV interest
Just started to fly arducopter
About
Activity Feed
"For newcomer its important to learn flying first before putting any expensive payload on aircraft. Get hand of flying and you can decide which configuration can suit your requirements. Although APM can fly full autonomous mission for you, sometime…"
"Is it from Discovery's Earth flight documentary series?"
"Is there a way to increase altitude of all waypoint while it is flying in Auto mode?"
"I have had similar problem and I have replace TPS 79633 regulator with TPS 73633. So far it it working fine on ground, have not made any flight with that. "
"Do you have log of crash? It can help to debug your problem"
"Well its true that APM has reached its limit and PX4 is the platform with many possibilities, but kind of testing APM has gone through has made its code reliable, stable and mature - which I would say most important aspect while using the platform…"
"Can Techpod be used for this purpose? http://www.kickstarter.com/projects/841500112/techpod-the-hobby-uav
If it can be used for this purpose it will greatly reduce time to implement this project."
If it can be used for this purpose it will greatly reduce time to implement this project."
"wow this is awesome. so far i have been using PX4FMU + IO with arduplane s/w. looking forward to use px4 release"
So far I have flown aircraft with autopilot, but there are always other people present who are doing differnt tasks. So onus was not entirely upon me to ensure that everything goes correctly. Pilot is there to fly the aircraft, one more guy to…
"Kite follows my plane every time I fly it"
"Hi Andrew,
I was looking through AHRS_ORIENTATION Option. Currently I am using Arduplane 2.71 on PX4. I want to mount it at -90 degree roll angle. For that I have set AHRS_ORIENTATION to 19 (Roll 270). After rebooting it doesnt not work. Seems that…"
I was looking through AHRS_ORIENTATION Option. Currently I am using Arduplane 2.71 on PX4. I want to mount it at -90 degree roll angle. For that I have set AHRS_ORIENTATION to 19 (Roll 270). After rebooting it doesnt not work. Seems that…"
"Hi Andrew,
Can you tell us how wind estimation algorithm is implemented in Arduplane? I am using Arduplane 2.71 on PX4 and I have disabled airspeed sensor. Even after disabling airspeed sensor it shows different AS and GS on Ground station. Am I…"
Can you tell us how wind estimation algorithm is implemented in Arduplane? I am using Arduplane 2.71 on PX4 and I have disabled airspeed sensor. Even after disabling airspeed sensor it shows different AS and GS on Ground station. Am I…"
"Flew with PX4 flashed with Arduplane. Stabilized and FBW-A mode works fine. Will try waypoint navigation next week. So far looks good. Great work"
"How did you connect receiver output to PX4IO board?"
I have flashed my APM 2.5 with Arduplane 2.70 using Mission Planner. I want to fly this with fixed wing conventional configuration ( Aileron, Elevator, Throttle and Rudder). I have been reading Arduplane wiki and I have following doubts1. On…
"Hi,
I got PX4FMU + IO kit recently. I have setup development environment following instructions on PX4 homepage and everything has gone smoothly so far.
I am trying to setup HIL for fixed wing. I am able to connect qGroundcontrol to FMU and start…"
I got PX4FMU + IO kit recently. I have setup development environment following instructions on PX4 homepage and everything has gone smoothly so far.
I am trying to setup HIL for fixed wing. I am able to connect qGroundcontrol to FMU and start…"
