Gender
Male
About
Location
Sevilla
Please tell us a bit about your UAV interest
I'm studying science at my High School and we're building an UAV copter.
Hometown:
Seville, Spain
Activity Feed
"Well, now the quad is more stable than before, but it still obscilate. It's got a lot of vibrations and I don't know if it's because of the frame, the motors o whatever. How can I fix this?
Thanks a lot."
Thanks a lot."
"Whit Tono's config it is more stable than before, but I still have to improve it a bit. What means the IMAX param?"
"Well. I'm trying to tune it at the moment. Let's see if it works!"
"Thank you all. I'll try to read and tune all params and we'll see if it works or it doesn't. I hope it works 'cause we've had a very hard work building the frame, looking for help, etc."
Hi! Sorry for making so many questions, but this is our first quad and we've lots of questions. We've tried to fly in stabilize mode, but our quad is not stable. Look at this video to watch what happens:http://www.youtube.com/watch?v=U2lzR1kuW0sI'm…
"Thanks a lot for your replies. I'll try to do that and I hope it work properly.Thanks!"
Hi guys! With our quad built, we want to program some missions, but we're not sure what do we have to do. I've already read some tutorials, but they're not clear enougth. What did you do to program your mission for the first time?Thanks!
Hi guys! We're setting up the PID's 'cause our quad makes very strong movements and we're trying to stabilize it. `What does each param mean? Thanks a lot!
Hi guys! Our quad is already build and programmed (I think so), and when we tried to take of for the first time, we noticed that it not stable, as you can see in this video:http://www.youtube.com/watch?v=U2lzR1kuW0sWhat can I do to repairing this…
"The blue led on the board is off, so it means that is not reciving information from the ublox."
Hi guys!After a few days setting up my quad and getting ready all the params of it, I noticed that the GPS doesn't work.It worked fine before, but now I don't know why It doesn't seem to work. The led on the GPS module is on, but nothing else.Last…
"Thanks a lot. I'll try to follow the instructions from the video tomorrow. If it works well, I'll record a video and upload it to show you if all is correct.
Thanks again!"
Thanks again!"
Hi you all! Now, our quad works well, but the sensors are not well calibrated. When you see the HUD, it is not straight. Here it is a photo with the problem.Any solution to this?Thanks a lot!IMG_0292.JPG
"IT WORKS, IT WORKS! Finally it works but there's a little problem now. We've two ESC diferent from the other two because the old ones broke down. And when I controll it with the radio, the quad starts flying firts from one side and is not stable.…"
Hi you all.I'm trying to fly my quad without using the GPS (which is been shipping). But I have some problems with it. I don't know how to save the configuration at the Mission Planner, so I don't know how to make it fly. All works ok, but I still…
