Gender
Male
About
Location
New Delhi,Delhi
About Me:
I am a beginner in ROBOTICS need help THANKS IN ADVANCE
Please tell us a bit about your UAV interest
very very very much interested cant express my feelings i want to make everything from scratch! NEED HELP
Hometown:
NEW DELHI
Activity Feed
"Please buddy help me do this. I am getting these errors even without editing anything-
I am having many errors in compiling the default firmware, here they are-
compassmot.pde: In function 'uint8_t mavlink_compassmot(mavlink_channel_t)':…"
I am having many errors in compiling the default firmware, here they are-
compassmot.pde: In function 'uint8_t mavlink_compassmot(mavlink_channel_t)':…"
"Does alt-hold mode require compass and magnetometer to be turned ON?
I turned them of for the reason that the APM mission planner didnt detect my compass sensor. it failed calibrating it and so i disabled it."
I turned them of for the reason that the APM mission planner didnt detect my compass sensor. it failed calibrating it and so i disabled it."
"is the placing of GPS incorrect or something else?
GPS is placed over the APM 2.5 on a carbonfiber plate , and ofcourse its insulated properly so as to prevent short circuiting."
GPS is placed over the APM 2.5 on a carbonfiber plate , and ofcourse its insulated properly so as to prevent short circuiting."
Hey guys,I finally managed to fly my quad pretty stable when hovering after a long patience. It flies for about 10-12min with a 3300mah 4s 25C battery.I am running Arducopter 3.0.1 rc7. when I tried to run for the first time, the compass which was…
"Am having the same problem and even after ESC throttle calibration, it dosnt work!"
Hi,My ch2 input(pitch) isnt working in the board. Some defect inside the board surely. I have tested using every possible way and its not working.I tried using radio calibration, used different Rx channel ( to ensure that Rx has probs) but the APM…
"Please answer someone. big problem it is. :("
Hi,I tried everything, resoldered, but still the channel 2 input not working in my APM 2.5Is it possible to change the channel 2 with any other free channel like ch7,ch8?channel 2 is pitchReally feeling sad, this is my first costly board I bought…
"well this came after the beerlift."
"Someone help please!"
Hi,Whats the easiest way to change the channel 2 with another free channel like 5,6 or 7. I am new to APM and let me know through the basics.The problem is the my channel 2 aint working, soldering issue but still.I am making a heavy aerial…
"Hi Test Pilot Mafia- I dont have anyframe..wanted to build a cheap(cheapest) one myself.
please help"
please help"
Hi DIYDRONES Guys,I really need help.I bought these things for building my cheap quadrotor which would cost less than 400$.1) Arduino Pro mini2) 4 ESCs 30A3)4 Motors4)4 Props5)IMU 6DOF6)FTDI Chip for arduino pro mini7) BatteryWhat should I do NOW?…
"Hi,
I have the same stuff but confused what to do know. My knowledge is insufficient..could someone here help me??
plz"
I have the same stuff but confused what to do know. My knowledge is insufficient..could someone here help me??
plz"
