"Hi all,
1.  do not leave lipos on full charge for more than a week
2.  get into the habit to put lipos on storage charge when u get back from flying and charge only when u have decided to go fly next day.
3. keep a cut off cap for urself, 20 or 30…"

"I was planning to get Windows8,,, but i think i will delay that to a later date... 
need all my hobby stuff to work on it
ramesh tahlan"

"I just acquired a MacBook Air.. hope one day i can run my APM2 on it
regards
ramesh tahlan"

"Worth a try..
lot of us would be waiting for the results
cheers"

"Archit
if ur multicopter flying wt is 3Kg, and u r using 35-49 motors which use 800W of power.. then that motor is capable of producing 2,000g of thrust per motor.... 
so something seriously wrong, 
lets assume a efficiency of 70%.. so each motor…"

"hahaha..
1.  that is a typical nightmare of any designer... let me try and make it simple for u... for a multicopter..... u will never hit one hour of flying time, unless the scientific community some up with a solution of super conductivity in ur…"

"Hi.
i am using the APM2... and have hooked up the cam mount servos to output 10 and 11 for roll and pitch... the servo respose is toooo slow.
By hit and try I  changed  CAM_R_REV to 4 and finally the roll axis became faster. So 1 was real slow,,,…"

"hi,
I am using a 5.8 video 500mW Tx system (hobbyking)... not getting a clear video, i mean getting good... but not very good... i need live broadcast quality and for documentaries... or somewhere close to it from my Quad set up...... with just the…"

"Bradley.
I dont have a sonar, but logically, even when the sonar is pointing downwards, it does get certain reflections upto a articular angle in all directions, as all radiations have a polar diagram of returns, which it processes and takes the…"

"awesome, and congrats. though my APM2 is flying just right, i am still mortally scared to hit the loiter and RTL sw in my Tx. but the day is close when i will do it..."