Gender
Male
About
Location
Montreal
About Me:
Open Source controllers, autonomous flying, 3G Telemetry, willing to experiment and test multi-copters and fixed wings.
Please tell us a bit about your UAV interest
Open Source controllers, autonomous flying, 3G Telemetry, willing to experiment and test multi-copters and fixed wings.
Hometown:
Montreal/Dubai
Activity Feed
"Awesome work."
"@ Kyomo, very nice work. I have completed the setup few days ago using Raspberry Pi, Pi Cam and gstreamer. It would be great if you could publish your work so others in the community benefit.
My operator does not allow SIM-to-SIM traffic, hence…"
My operator does not allow SIM-to-SIM traffic, hence…"
"@Patrick, If you are referring another Windows machine: No. I have updated my VGA drivers though. I will borrow another Windows machine, install gstreamer and test."
"@Patrick, I got it to work between the Pi and my main workstation, MacOS.
Raspberry Pi:
raspivid -t 999999 -w 1080 -h 720 -fps 25 -hf -b 2000000 -o - | \gst-launch-1.0 -v fdsrc ! h264parse ! rtph264pay…"
Raspberry Pi:
raspivid -t 999999 -w 1080 -h 720 -fps 25 -hf -b 2000000 -o - | \gst-launch-1.0 -v fdsrc ! h264parse ! rtph264pay…"
"@Patrick, If I start the Pi before the Windows (GCS), I get no freeze. I get nothing. I only get the freeze if I start Windows, GCS, before the Pi. The message I sent you was when I enabled debugging, other than that all is working correctly.
I have…"
I have…"
"@ Patrick, does this make any sense?
(gst-launch-1.0:2649): GLib-CRITICAL **: Source ID 18 was not found when attempting to remove it"
(gst-launch-1.0:2649): GLib-CRITICAL **: Source ID 18 was not found when attempting to remove it"
"@Patrick, Will do that and update the blog. Much appreciated Patrick."
"Hi Patrick,
I've upgraded my laptop OS from XP to Windows 8 Pro and re-installed gstreamer. It runs now without any error, however, If I start the script on the Pi and then gstreamer on GCS (Windows 8), it does nothing. But if I start the GCS first…"
I've upgraded my laptop OS from XP to Windows 8 Pro and re-installed gstreamer. It runs now without any error, however, If I start the script on the Pi and then gstreamer on GCS (Windows 8), it does nothing. But if I start the GCS first…"
"@Patrick Will try upgrading the OS. I've literally spent over three nights working on the video :( .. I avoid any OS other than XP due to drivers compatibility: (Mission Planner, TTL-Ethernet, UART, etc...). But now since I have no other choice…"
"It is Windows XP!!!"
"Patrick. These are screenshots of what I am getting. I have honestly installed and uninstalled several versions over 10 times and still getting SAME THING. Appreciate your help."
"Hi Patrick,
I've been trying to run gstreamer for Windows and it keeps on failing. I've downloaded both 1.4.4 and 1.4.3 with no luck. I keep on getting same error upon running gst-launch-1.0.exe.
"Gstreamer-Warning **: Failed to load plugin…"
I've been trying to run gstreamer for Windows and it keeps on failing. I've downloaded both 1.4.4 and 1.4.3 with no luck. I keep on getting same error upon running gst-launch-1.0.exe.
"Gstreamer-Warning **: Failed to load plugin…"
"Patrick, this is pretty cool. I'll be testing your previous Raspberry Pi posts and this one tomorrow onwards and will post my findings.
I am also interested to stream Telemetry and Video over 3G/4G (Raspberry Pi with APM/Pixhawk). I have read some…"
I am also interested to stream Telemetry and Video over 3G/4G (Raspberry Pi with APM/Pixhawk). I have read some…"
"I'd be very interested Michael."
"Hi Alex,
Try using a UV filter, you won't have this reflection. In my experience, the best times for survey missions are half an hour after sunrise and an hour and a half to two hours before sunset. At noon times, brightness of the sun is too high."
Try using a UV filter, you won't have this reflection. In my experience, the best times for survey missions are half an hour after sunrise and an hour and a half to two hours before sunset. At noon times, brightness of the sun is too high."
