Gender
Male
About
Location
Evandale Tasmania
About Me:
I am a retired man who has been flying RC planes for a number of years. I have not flown for over 12 months due to health issues . I wanted a hobby that I could do around our property, so I saw and decided to get into multi rotors
Please tell us a bit about your UAV interest
I did some research into Walkera QR350, but waited until the 350Pro came out and purchased one. My son (46) who lives with us has now also bought the same. I am using an SJ4000 camera, beautiful pictures. My son uses a Mobius, which also has a beautiful picture. We have posted Utube videos of our flying and I will forward them on.
Hometown:
Evandale Tasmania
Activity Feed
"Bottom left hand corner of the members shows me!
I wanted to add a screen shot of the picture quality of the mobious on my Tali H500"
I wanted to add a screen shot of the picture quality of the mobious on my Tali H500"
"I forgot to say that we have a Walkera G-3DH gimbal for sale if somebody wants one. Asking price around $300.00 ono."
"I am presently flying a tali h500. We also fly a Scout, also have and fly a qrx350. Have tried the 3d gimbals but have reverted back to a 2d , my preference. We have found the best camera to use is a mobious. The conversion unit to a go pro…"
"Sorry, I dont know any other way. It seems to effect the mother board.
As I said earlier on replacing the mother board I solved my problem."
As I said earlier on replacing the mother board I solved my problem."
"Hi, I can't help with a download of the original firmware.
I don't know of one. Read my previous reply. I replaced the main board and this fixed mine."
I don't know of one. Read my previous reply. I replaced the main board and this fixed mine."
"Hi, Ididn't get the quad back to standard settings, this is what eventually did.
1.replaced the devo m. No change.
2.replaced reciever. No change.
3. Replaced main board. Now it works.
would suggest this would be the place to start, cost around…"
1.replaced the devo m. No change.
2.replaced reciever. No change.
3. Replaced main board. Now it works.
would suggest this would be the place to start, cost around…"
"I am presently flying a QR X350 Pro with some changes. I have put on the extended legs, but find that they quad wont stop and lock on landing. I have to bring it down, go into hover, reducing throttle and as it gets down to ground level, quickly…"
"Thanks for the advise. I have been able to get back to my standard QR X350 pro settings & I have deleted mission planner all together it s not for me."
In Mission Planner, Initial Setup.Install Firmware V3.1 5 Quad . After do you want to upload Ardu Copter V3.1.5? Each time I connect the page goes to download, the screen freezes, when I remove the plug from the quad, the table immediately goes to…
