Interesting topic on Gizmag.According to van Loenen, all the plastic parts, which include the clamps to attach the motors, can be 3D printed in ABS, with the appropriate files made available on van Loenen's website. The clamps used may not work with…
"First start with acrobatic mode , and first try I and D value 0. You can test on your hand after find unoscillated settings you could fly. P is rate for the gyro values between motor corrections. If give 0 you have no gyro correction. You could…"
Never ending story... Xbee's Could anyone share their xbpro 900 ' [ mine one with cable one with antenna which Arducopter Wiki offered ] x-CTU configurations [ if you could save them to file with Profile>save it's better]
Which function set i have to set ? [ ZNET 2.5 ROUTER/END DEVICE AT ? 1247 ]
One connect IMU with diydrones adapter and one connected the computer with sparkfun USB explorer."
Which function set i have to set ? [ ZNET 2.5 ROUTER/END DEVICE AT ? 1247 ]
One connect IMU with sparkfun adapter and one connected the computer with sparkfun USB explorer.
"
"I try but i failed. Because Mystery Esc's will enter setup mode when powered in full th. When i wait for beep's its enter to setup mode and lower the stick will activate brake mode."
My steps 1- Connect RC channels2- Connect USB and Configurator make Transmitter Calibration3- Remove USB4- Connect ESC cables to APM5- Connect Lipo6- Sound looks good and lights look ok.7- Could change with mode GPS hold and could change to…
-Electronics floor
-Foldable design
-450 boom's version
-maybe octo version but i'm confused lifting performans relation between weight and flight time."
Which type of setup we use to set radio up. Traditional Airplane ? [ with aileron , elevator and rudder ? ] ORHeli 120 degree ccpm ? Or other Swashplate type ?