Gender
Male
About
Location
Delmar, MD
About Me:
Electrical and Construction Engineering student. I work for a architect/engineering firm.
Please tell us a bit about your UAV interest
I am interested in anything UAV, USV related. Some say that UAV's are the way to go, but if you use USV's then you don't have to contact FCC lol
Hometown:
Salisbury, Maryland
Activity Feed
"sorry of this is a dumb question but I am after a bit of clarification. You said that v1 light works with the apm v1 1280. did you also test v1 light with the magometer? And did you also test it with the camera? Thanks in advance."
"-eagle, no I didn't see those posts. Thanks for sharing. I will check them out."
"To All:
First, I hope this is the place to be posting this, if this is not, I am sorry in advance...
I have a question about Arduplane... I see that Arducopter is getting worked on (updated) on the regular and I haven't seen anything about…"
First, I hope this is the place to be posting this, if this is not, I am sorry in advance...
I have a question about Arduplane... I see that Arducopter is getting worked on (updated) on the regular and I haven't seen anything about…"
"If you look at the developers website of drone cell, he has sketches for tcp/ip and all the like... I would start there... also arduino has some good code snippets on their website... "
"-Jeff
I am interested in ordering one of these... what is the cost..."
I am interested in ordering one of these... what is the cost..."
"-R.V. Check this link out, are you trying to get something like this to happen? this is a sweet design for an airplane... Having half of the wings flip like flaps just to get take off then it is a normal plane that fly's normal...
RC Airplane VTOL…"
RC Airplane VTOL…"
"I agree with the both of them Tomas, However, I still think you need a capacitor inline with the output or ground of the sensor... Also now that I know there is an op amp involve, one should consider if it has enough reference voltage to push this…"
"I personally wound Have to see a schematic of the layout. but you could make a filter by adding a capacitor in line of the out put. (black wire) there are a few other possible solutions however i would need to see your setup."
"I personally would just take out the motor and try it by itself... With that, you will know the answer pretty much... Meaning, if the motor doesn't work by itself then that is the problem... If the motor does work, then you have more to troubleshoot…"
"It looks to be a cap... find on on digikey or jamaco for cheap and simply replace... the easiest thing to do is, to hold it with tweezers or a air suction device and place it over the Leeds of the board and re-solder it... just lightly touch each…"
"Yes this can be done... However, the Ar drone is only for Iphone for now, but coming to android... secondly, it is Wi-fi not Bluetooth or over the cdma or gsm networks for cellular devices...
Check this out... works with arduino and just needs a…"
Check this out... works with arduino and just needs a…"
"I would be of the few who would like to see a design through to the dip. If we can put together a list or group to help get it made.
Also another great post."
Also another great post."
"Great write up again Geoffrey... I can't wait for the third part...
"
"
"Great write up. Keep up the good work and effort."
"You need to have a server setup from what I am told.... At least the guy who had one working says so..."
"I completely agree. So much is on the Internet now so pretty much anyone can find the info needed. I say keel up the good work and please let us know when u have boards to be sold. I do intended to buy a few. Keep it up innovators :-)"
