Gender
Male
About
Location
NT
About Me:
I'm just a basic hobbiest with occasional ideas about building new things.
Please tell us a bit about your UAV interest
I would like to build a quad drone that can lift about 1.5kg. I want to design it so I can mount small yagi antenna on the top and a android phone under neath that is viewed by the camera
Hometown:
Darwin
Activity Feed
"Hi there,
thank you for that. very helpful.
So what sort control boards should I use that will allow my quad copter to fly level and hover?
I did try 8" props but it didn't seem to want to get off the ground. I actually tried props from 8" to 12".…"
thank you for that. very helpful.
So what sort control boards should I use that will allow my quad copter to fly level and hover?
I did try 8" props but it didn't seem to want to get off the ground. I actually tried props from 8" to 12".…"
Does anyone know how to stabilize quad copter or make it hover easily?running a quad copter with kk2 board only,2200ah battery1200kv motors10" props25 amp esck450 frame. always seems to fly all over the place when getting off the ground.
Going to look at potentially building full size quad copter with dual motors on each leg that can lift one person. I'm not an expert, but I like to go outside the boundry's. It is possible it cant be done but I'm happy to hear from people who are in…
"Ok found what I did wrong. I thought I had the props on correct. In fact I had the opposite. It flys well. Thanks everyone."
"thanks for the help. I'll see how it goes with smaller props. cheers"
My quad copter won't fly. I built my first quad and I have problem it won't lift off the ground.It is made up of the following.Q450 frameLippo 2200 batteryKk2 boardFurniture 30a plush wax1200kv motorsCarbon fibre props 14/7 sizeI haven't done any…
"Ok thats sounds good. Ok where should i start. Ideally the parrot drone is perfect concept for what I want to do but it's not suitable for the application i want to use it for. I want to build something like the parrot drone but more stronger and…"
I want to build a quad copter drone like the parrot 2.0 that I can fly with iphone and view with the camera from iphone. But it needs to be able ot lift 2kg extra which will be a yagi antenna seperatlely. can anyone either help put me in the right…
