Gender
Male
About
Location
Quebec
About Me:
I'm a sound engineer in life but do a lot of hobbies, scuba diving, woodworking, music and now multicopters.
Please tell us a bit about your UAV interest
I've been looking to do arial video for long time but everything was to expensive. Now whit the price going down it's accessible and found about FPV racing and that really got me going.
Hometown:
Delson
Activity Feed
"No I didn't. It was part of configuring everything but it was not a mandatory setting for me. But I would like to be able to do it for some situation. So I'm still interested to how to do it."
"For anybody that as the same problem, I just found out that the channel AUX1 in Heli mode is not used but in Plane mode AUX1 is flaps. So got in Plane mode and got my AUX1 back.So event if you have a multirotor or helicopter, use the plane mode or…"
HiI have a a Devo 7 with RX701 and also have some RX601.Here's my problem, the throttle and the aux1 are outputting the same data.Same thing with RX701 and RX601. It's like it's tie together.On the RX701 I have everything working, Throttle, Ail,…
"I will check the log. The quad seamed very stable and no vibration in the wire rig. When I was holding it to check the I setting I didn't feel any vibration but I will check through the the log anyway.
Il will do some more test but I may end up…"
Il will do some more test but I may end up…"
"?? Sorry I don't understand what you mean by "not in weight"
do you mean balance? (all my props are balanced)
Do you mean the ration thrust weight? (I use 5X3 props, with the cobra 2300Kv it's 431g max thrust with 3s. So 431*4=1724g. 50% of that…"
do you mean balance? (all my props are balanced)
Do you mean the ration thrust weight? (I use 5X3 props, with the cobra 2300Kv it's 431g max thrust with 3s. So 431*4=1724g. 50% of that…"
"OK
Did some tuning in flight and here were I am right now with the PID's.
It react good but still have some wabble at very hight throttle punch. Maybe I'm too difficult had that's normal!!??
I will edit the video a little later and post it.
APM…"
Did some tuning in flight and here were I am right now with the PID's.
It react good but still have some wabble at very hight throttle punch. Maybe I'm too difficult had that's normal!!??
I will edit the video a little later and post it.
APM…"
I'm trying to find good setting on a 230Frame (XHover MPX230) with a Multiwii Megapirate V2 board with the Arducopter Software (Mac).APM%20MPX230%20-%20PID%27s.pdfSo far that's where I'm at. It's not to bad but could be more snappy. Here are some…
"Hi
I'm looking for that "Angle_Max" and i can't find it. I on the APM planner 2.0.14 on Mac.
The only Angle Max I have is MNT_ANGMAX_PAN/ROLL/TILT but that's for the gimbal."
I'm looking for that "Angle_Max" and i can't find it. I on the APM planner 2.0.14 on Mac.
The only Angle Max I have is MNT_ANGMAX_PAN/ROLL/TILT but that's for the gimbal."
