Hello all,

We're releasing a brand new UAV airframe featuring super light weight glass fibre laminate construction with carbon fibre and kevlar reinforcement in critical stuctural area. All removable 3 piece wing, tail booms, v-tail and 2 large hatches allowing excellent access to fuselage internal area. All wing and tail surfaces are hollow composite mouding which you may install extra hardware in the central wing section.

The airframe comes with carbon fibre main landing gear and machined aluminium steerable front wheel assembly. All nuts, bolts and nut plates are mil-spec.

This airframe is made to endure the daily usage and handling using lesson learned from hundreds of hours operating other UAVs in theaters. You may choose to buy an empty airframe or with any of the optional items listed below

Alternatively you can also request a full carbon version which will be even lighter but be aware if use 2.4ghz RC gear in a full carbon airframe may not yeild happy ending!

Specifications:

Wingspan: 2500mm / 98"

Length: 1767mm / 69.5"

Gross weight: 11kg max

Control: Ailerons, Flaps, Ruddervators, Throttle, Steering

Recommended engines: 26cc to 50cc 2stroke or 4 stroke gasoline or equivalent eletric motor

Options:

- All control linkages and mil-spec wiring harness setup and installed

- High power Hitec servos or UAV grade servos

- Installation of engine of your choice with all fuel tanks and fuel system installed and tested

- Onboard electrical generator - please specify how may watts you want and voltage 12V or 24V typical

- Integration of autopilot - we use CloudCap Tech, UAV Navigation or Micropilot

- Navigation and Strobe lights (aviation grade)

- Transponder

- Fuel injected 2 stroke or 4 stroke engine

- Balistic recovery parachute

We're in Melbourne, Australia and we'll have our website up shortly with other products. Feel free to contact me at this time for pricings and options.

Ryan

Finally a somewhat nice enough of a day for us to put another flight on the new Javelin Mk2. It's very windy however and cross wind too - I do hate Melbourne weather.

In this flight, I'm just getting the control surface angles and mixings dial in so we can input that into the autopilot. All live telemetry was recorded.

It flies really well and plenty of power and lift. Current weight comes in at 11kg with a design max gross of 16 - 17kg

Team Javelin UAS - UAV OBC D2 2010 from Javelin UAS on Vimeo.

Here is our Delivery II for this year UAV Outback Challenge - Search and Rescue. I wish we have more time to make better video but it's 5 weeks away!!!

Anyway, enjoy - looking forward to making some Autonomous flying video for you later.