Gender
Male
About
Location
Antananarivo
About Me:
Videographer in Madagascar. Moving to Botswana soon.
Please tell us a bit about your UAV interest
I would like to use Arducopter to get some fill and overhead shots. But first, I'd like to learn how to fly one!
Hometown:
Atlanta
Activity Feed
"Great Question!
Surprised no one has responded.
William I was researching doing this same project and came across your thread.
What about using 2 3dr quad power distribution boards? Just tie the power leads together coming from the battery, 1 board…"
Surprised no one has responded.
William I was researching doing this same project and came across your thread.
What about using 2 3dr quad power distribution boards? Just tie the power leads together coming from the battery, 1 board…"
"Hi Enrique,
Maybe too late but wanted to report that I called 3Drobotics and asked about the landing gear (broke mine too and always need a spare) which they said they could sell me at $10 bucks per leg. A bit pricey. I spoke with Fabian and he…"
Maybe too late but wanted to report that I called 3Drobotics and asked about the landing gear (broke mine too and always need a spare) which they said they could sell me at $10 bucks per leg. A bit pricey. I spoke with Fabian and he…"
"Yes I had 2 come off as well. Mine was the newer type, hot glued from 3DR. It was easier than I thought to peel up the glue."
"average flight duration."
"That's quite a customized machine you have . Nice lights too.
You must be getting some good flight times."
You must be getting some good flight times."
"No, not on a mac.
taken on iphone upside down. flipped it ."
taken on iphone upside down. flipped it ."
Hello All,This is a subject that is touched upon over and over and I think it would be helpful if others could upload their Y6 weight, Fully Loaded, Average Flight times, What's been added from stock(Gimbals, Cameras Transmitters) and any Tips they…
"Well I have it wired to output 6 on the APM. + to S(signal} and - to -. But the blinkM mini only draws about 50ma."
Hello Everyone,I've been using a blinkM mini as an external LED to indicate "armed or disarmed" on my APM 2.6.I would like to use a blinkM Max for the same purpose but the blinkM max draws way too much current for the APM so what I would like to…
There is a 5v tap on the 3DR APM Power Module. I would like to use this to power my gopro.Any downside or risk to doing this? Loss of power to APM etc..Thanks,Ryan
I have a couple of motors and the mounting threads started to become stripped. I used the little aluminum "+" brackets that come with the motors in place of the fiber board discs that come in the 3D Robotics Y6 kit. Because they can mount flush, you…
"Really Appreciate this Info!
I converted to Y6 recently and noticed that yaw was weird, dipping in the direction of the stick instead of staying on plane.
I changed the frame type to 10, re-wired my motors to turn clockwise on top, counter-clockwise…"
I converted to Y6 recently and noticed that yaw was weird, dipping in the direction of the stick instead of staying on plane.
I changed the frame type to 10, re-wired my motors to turn clockwise on top, counter-clockwise…"
Hello Everyone.I have converted my hexacopter over to Y6 and simultaneously updated to the latest firmware.APM 2.5I am having an issue where any yaw command causes the copter to dip and veer in the commanded direction in stead of rotating on a…
Hello Everyone,Is anyone using the optional gimbal kit with the 3DR UDrones Hexa B?I have run into a wall on this.I have read and reread the PDF many times on hooking this thing up.The problem is that I am getting brown outs on A11. Not surprising…
Does anyone know of a decent micro-Quad that I could as a trainer? Yes, I see many but.......I already purchased an Ardu hex (I don't want to fly it until I feel confident with something simpler) I also purchased the telemetry kit and Spektrum DX8.…
