Gender
Male
About
Location
San Diego, CA
Please tell us a bit about your UAV interest
Mostly FPV and autonomous flight.
Hometown:
Tucson, Az
Activity Feed
"I started using 'Shoe Glue' or E6000 glue as it's known by in the states. Another 3dR engineer suggested it. It seems to almost melt the foam together. "
"I had this happen with a Mini Talon with landing gear. I had a prop strike happen upon take off that caused some serious vibration at a certain motor RPM. Eventually the vibration jiggled the motor screws loose and the whole thing came off. In my…"
"Thomas. I'm actually using the CC 20 amp BEC. That's why it became so concerning to me when the symptoms started happening. I will probably replace my servos in the not too distant future. The response 'your BEC doesn't provide enough power' that…"
"Good luck. As mentioned in the thread.. You might want to add a capacitor in addition to the zener diode. I started noticing that one of my servos (included in the RTF kit) dies upon power up."
"Why does this sound like a rehasing of the ARC report? "
"From what I recall you have to download RTL1090.
http://rtl1090.web99.de/
You then enable networking in the config, so for example create a shortcut..
C:\Users\SheepPr0n\desktop\ADS-B\rtl1090.beta3\rtl1090.beta3.exe /30003 /multilat1
Insert the…"
http://rtl1090.web99.de/
You then enable networking in the config, so for example create a shortcut..
C:\Users\SheepPr0n\desktop\ADS-B\rtl1090.beta3\rtl1090.beta3.exe /30003 /multilat1
Insert the…"
"Glad you have it flying. We'll have to work on that other 'black ops' project next. "
"Keep in mind that the big Talon and Mini Talon are two different animals. You'll need Parameters for the bigger Talon. "
"After using this in the field today, here's some constructive feedback. I still think this was a great addition to Mission Planner.
The biggest thing is the size of the air traffic icons. The plane picked up by ADS-B plotted in mission planner is…"
The biggest thing is the size of the air traffic icons. The plane picked up by ADS-B plotted in mission planner is…"
"So now the next question is.. Could we talk Flight Radar 24 allow us to feed not only ADS-B data for that location, but our drones location as well? Hmmm.. Of course that'd require a network connection. Which can be solved by a portable hotspot or…"
"This is awesome. Looks like you need to run RTL1090 and it makes the TCP connection over. Just tracked a flight outbound from SAN..
The only 'bug' I noticed was it takes FOREVER to close Mission Planner. "
The only 'bug' I noticed was it takes FOREVER to close Mission Planner. "
"There's a huge thread for the Mini-Talon as well up on RCG..
http://www.rcgroups.com/forums/showthread.php?t=2043439
Plus I have 3d printed parts for it up on Thingiverse as well.
It's a fun throw and go plane. I've been flying mine since May…"
http://www.rcgroups.com/forums/showthread.php?t=2043439
Plus I have 3d printed parts for it up on Thingiverse as well.
It's a fun throw and go plane. I've been flying mine since May…"
"Hmm. I set my rudder up to do a coordinated turn...
http://jetairgroup.com/2013/03/19/how-to-make-coordinated-turns/
The way the Wiki puts it, sounds like I've been doing it wrong. "
http://jetairgroup.com/2013/03/19/how-to-make-coordinated-turns/
The way the Wiki puts it, sounds like I've been doing it wrong. "
