My drones have always flown pretty well. Built another drone frame out of polycarbonate and aluminum arms. Now I'm getting unusable altitude changes in loiter and other althold modes. So I have to go in logs and I am getting readings of like az like
Read more…So I'm on version 5 of my drone. First was a simple s500 quad that flew great, but after a crash developed a really bad vibration that I couldn't ever fix. So bought a hex kit, to make into a fully automated beer delivery drone. It actually flew r
Read more…First let's not get crazy but I was so excite to get this installed and be done with my ground station setup.I bought this apm switched and can't get it to work with my flysky re-i6s I tried on one of the switches but it only sent the signal for 1000
Read more…I ordered three separate sets of these because I wanted to make sure one would be the right chipset. This one is the genuine UVC dongle and works with the Tower app.$22.50 will include shipping anywhere in the us.Will include the USB OTG cable as wel
Read more…Hey guys. I have setup a GLB brushless gimbal. I can't figure out the correct setup through apm. I want to be able to adjust with my rc6 input but also be able to POI following. I got it setup correctly through the gimbal software to control it with
Read more…I got my hex flying great but now I'm getting greedy and want to get live video feed into my tower app. I've tried several different port numbers bubut haven't been able to find the right one and the internet has not helped. Is there a way to find th
Read more…Quad specs...500g frameExt GPS/comp1000kv motors/30a esc10x4.7 propsArducopter apm2.xMy quad was flying perfectly one day and then a gust of wind flipped it over and crashed from pretty high. I rebuilt it with a new GPS. Put it all back together and
Read more…I'm trying to figure out the video out and ground to hook up the video feed into tower. I thought when I cracked this open the vrx would be separated from the monitor board but alas it isn't. Any help on either which are the correct outputs or how to
Read more…Hey guys. Thanks in advance for the help. I wanted to verify something. I had my quad working great and wanted to add an OFS. I hooked it up correctly and did the solder bridge where I cut the 5v bridge and bridged the 3.3v on the back of my APM 2.8.
Read more…