Gender
Male
About
Location
Ho Chi Minh City
About Me:
Each day is a day to change my life!
Please tell us a bit about your UAV interest
Quadcopter
Hometown:
Ho Chi Minh City
Activity Feed
"Hi Richard,
It's good to see your reply! thanks you!
I used switch option on channel 7, but when I see my quad complete flip, I've put the switch back to low position, is it wrong?"
It's good to see your reply! thanks you!
I used switch option on channel 7, but when I see my quad complete flip, I've put the switch back to low position, is it wrong?"
Hi everyone, Today I tried to do a flip with my quadcopter, but the result is so bad! Can anyone show me how to do a flip without crash? :( Watch my video for more details. Thanks you! Youtube link: http://youtu.be/FfHYetKbpZw
"I've liked you, I cant fly. But, just read carefully, you will fly perfectly. I'm sure about that! even when you use stock PID"
"I hate photobucket >.<"
"Hi Gary,
I broken my APC 10x4.7, so I decided to replace by two 10x4.5 :D but quad still flied ^^ I've just received new prop and landing gear.
Thanks you for your advise!"
I broken my APC 10x4.7, so I decided to replace by two 10x4.5 :D but quad still flied ^^ I've just received new prop and landing gear.
Thanks you for your advise!"
" Gary McCray: thanks you! I'll try it soon. In the video, I use 2 10x4.5 propellers and 2 10x4.7 propellers, maybe it causes that problem :D until now, I realize that 5500mA is too big and not necessary, the combination of many 3s-4s is better than…"
"So sorry :D I need some adjust ^^ It's public right now "
Hi everyone,As I promised, I've made a video to show the result of new flight control board.Log dataGyro&accel (fluctuate around -1 and 1)Closer look:Roll, pitch (maybe my quad goes to one direction only :3)Can anybody tell my why I get a error in…
"I plan to put the battery below the frame, of course, I will use s.t to make the frame higher than the height of battery, I don't want to destroy my battery pack,too T.T
(my 5500mA/45C 3S can't fit the lower deck of frame. I've tried to put it below…"
(my 5500mA/45C 3S can't fit the lower deck of frame. I've tried to put it below…"
"Yes, it works well!"
"Thanks, I will make a video on tomorrow ^^
Nguyen Duy Hung : Yes ^^"
Nguyen Duy Hung : Yes ^^"
"You need to make the throttle is between 40-60%, or throttle is at middle to get altitude hold and loiter"
"Try with my blog
My first quadcopter
take a look at II/ Vibration Damping for xtPilot"
My first quadcopter
take a look at II/ Vibration Damping for xtPilot"
"Hi Finnius,
you should check your GPS, watch how many sattellite it received?
You also try to make quad work well in altitude hold. in my case, altitude hold can work well as about 1m @@ lolz, very well,huh?
I also tested loiter mode too. it worked…"
you should check your GPS, watch how many sattellite it received?
You also try to make quad work well in altitude hold. in my case, altitude hold can work well as about 1m @@ lolz, very well,huh?
I also tested loiter mode too. it worked…"
Hi Guys,Firstly, I want to say thanks to APM2.5 dev team, 3DRobotic, their open source projects that helped me a lot to complete my first drone, include xtPilot - a modified hardware shown above, original is APM2.5 open hardware project.(see my…
"Austin Suhler,Mark Harrison,Leonardo Garberoglio,CrashingDutchman,mdisher, Juan Carlos Hdez,Paul: thanks your words, it really made me keep the passion to work!
Rana : thanks, I will do it ^^
Philip: I will do it, Phil, just wait for my test.…"
Rana : thanks, I will do it ^^
Philip: I will do it, Phil, just wait for my test.…"
