Gender
Male
About
Location
Weesp, noord holland
Please tell us a bit about your UAV interest
Most intrest is in airial videography and photography and of course the technology involved.
Hometown:
Amsterdam
Activity Feed
"Just ran a test with the TX set for plane mode, The copter still spinning however after a little while one of the rotors stopt. or went really slow.
Perhaps a failing ESC?! As the ESC connected to this motor has been connected to a diferen one some…"
Perhaps a failing ESC?! As the ESC connected to this motor has been connected to a diferen one some…"
Hi there,We are trying to get our hexacopter flying for a great while now, and we are struggeling to overcome all obsticals.We have calibrates all esc's were able to programme the copter via MP and tried flying it but when we increase the trotlle…
Hi there,As we are struggling to get our hexa of the ground, the first test flight was no succes. As we tried to take off it banked to the left en never got off the ground.We were thinking it might be one of the esc's so we got an ubec and seperate…
"James, thanks you for the idea, we have reversed the thottle, no response.
I'm afriad the probllem is in the outputs of the ardupilot board. in mission planner we see no results in outputs.
We haves esc's with brown, red and orange cables and have…"
I'm afriad the probllem is in the outputs of the ardupilot board. in mission planner we see no results in outputs.
We haves esc's with brown, red and orange cables and have…"
Hi everyone, I'm new on this forum and like to introduce myself.My name is Thom en i live in holland. I am building a hexacopter with my associate using the ardupilot 2.5.However we are having some difficulties getting it working. We use the walkera…
