Gender
Male
About
Location
NRW
Please tell us a bit about your UAV interest
I am relatively new to UAVs. At the moment i am in the process to build a quadcopter with APM 2.6 and a Taranis Tx/Rx set.
Hometown:
Cologne
Activity Feed
"Hi all,
unfortunately the topic was not picked up until now in the support forum. Hopefully i will find some time on the weekend to dig into this a little bit more. First step is that I will try to load some of the older firmwares back to one of the…"
unfortunately the topic was not picked up until now in the support forum. Hopefully i will find some time on the weekend to dig into this a little bit more. First step is that I will try to load some of the older firmwares back to one of the…"
"Dear all,
i opened an issue in the Arducopter 3.3 support forum Link. Hope that these guys have an idea or can fix the issue.
Thanks all for replying so fast!
Thomas"
i opened an issue in the Arducopter 3.3 support forum Link. Hope that these guys have an idea or can fix the issue.
Thanks all for replying so fast!
Thomas"
Hi,since I use Copter 3.3 Firmware i have a strange behavior that i like to share here. Maybe the one or the other has the same effect or knows how to fix it.Description: If I try to arm my Pixhawk I get different prearming check failures (EKF...,…
"Hi all,
sorry to bother you with this but i was not lucky with the search function.
Some weeks ago i found a post here that described how you can extract the mavlink data again from the SBUS by decoding the signal you can get from the serial port…"
sorry to bother you with this but i was not lucky with the search function.
Some weeks ago i found a post here that described how you can extract the mavlink data again from the SBUS by decoding the signal you can get from the serial port…"
"Hi Andre,
thanks for your reply. Yes you are right i mean the regulator and i also made a mistake with the voltage. Between GND and Vcc should be 5V (not 3,3V).
In the meanwhile i found out that one of the telemetry ports (Nr.1) still delivers 5V…"
thanks for your reply. Yes you are right i mean the regulator and i also made a mistake with the voltage. Between GND and Vcc should be 5V (not 3,3V).
In the meanwhile i found out that one of the telemetry ports (Nr.1) still delivers 5V…"
Hi all,some days ago i started to configure my HKPilot32 which i had bought some months ago on Ebay (together with some other stuff). I am using APMs for a while and wanted to get some of the new features which are in V3.3 (landing gear, kill…
Hi All,i am wondering if someone has successfully used the CH6 tuning option under AC 3.2.1? I tried this on an APM2.5 by using the latest Mission Planner software (1.3.31) and failed!Instead of getting the values form Ch6 tuning i only get some…
"Hi Paul and Luis,
thanks for your support. I also think this not easy to manage. May i try Pauls suggestion.
Have a good week.
Thomas"
thanks for your support. I also think this not easy to manage. May i try Pauls suggestion.
Have a good week.
Thomas"
"Hi all,
I asked myself if it is possible to show Simple Mode, Super S. Mode and Autotune on the Taranis display via telemetry. I am using the scripts of Luis V. (with some smaller modifications) but i was not able to find out which value in the…"
I asked myself if it is possible to show Simple Mode, Super S. Mode and Autotune on the Taranis display via telemetry. I am using the scripts of Luis V. (with some smaller modifications) but i was not able to find out which value in the…"
"Hi,
thanks for this great explanation. I will try to dig into this in the next days and will post my results here.
Happy flying
Thomas"
thanks for this great explanation. I will try to dig into this in the next days and will post my results here.
Happy flying
Thomas"
"Hi Luis,
thanks fo the explanation. I upgraded to 2.0.15 and set the variables but still no luck. I found out by some basic debbuging that the logical switches are recognized correctly. What is not set correctly is "FmodeNr=getValue(208)+1" (Line…"
thanks fo the explanation. I upgraded to 2.0.15 and set the variables but still no luck. I found out by some basic debbuging that the logical switches are recognized correctly. What is not set correctly is "FmodeNr=getValue(208)+1" (Line…"
"Dear all,
i am trying to set up the scripts of Luis Vale on my Taranis. Everything worked in principal and i got some infos to the screen but not all. Especially i do not get the flight modes from my APM ("FlightMode mismatch). I read many of the…"
i am trying to set up the scripts of Luis Vale on my Taranis. Everything worked in principal and i got some infos to the screen but not all. Especially i do not get the flight modes from my APM ("FlightMode mismatch). I read many of the…"
