Location
Hamburg
About
Please tell us a bit about your UAV interest
Skysurfer 2000 EPO Gopro Hero 4 Black EzUhf RX/TX LRS 1.2 Ghz video RX/TX
Hometown:
Hamburg
Activity Feed
"looks terrible in some parts, but that's only because it's an example..."
"Hello,
the 1.2 ghz tx has a female JST connector. Be careful to choose the Right corresponding male plug:
http://www.rcgroups.com/forums/showthread.php?t=1493712
the female port on the TX is very fragile, I would recommend gluing it down.
Also I…"
the 1.2 ghz tx has a female JST connector. Be careful to choose the Right corresponding male plug:
http://www.rcgroups.com/forums/showthread.php?t=1493712
the female port on the TX is very fragile, I would recommend gluing it down.
Also I…"
"facepalm,
the gopro AV out cable was broken. Small solder platform came right off the circuit board. Didn't expect that to be the problem...DSC00730_edit.jpg"
the gopro AV out cable was broken. Small solder platform came right off the circuit board. Didn't expect that to be the problem...DSC00730_edit.jpg"
Hello,I am trying to get a video link between a TBS Groundstation and a TBS unify.I set both RX and TX to Channel 8, 2510 Mhz,For the Groundstation, according to manual, that is dip switch combination 00000001. Unlike the lawmate I think that means…
