"How do I set Drift Mode to one of my switch positions from Mission Planner, there seems to be no selection for Drift mode?"

"Hi all,

Need some advice!  I have upgraded to 3.1 rc7 and flown flown it successfully a few times.  I have a few issues:
1. My compass calibration for the offset x = 201 (a little high), can't seem to get it lower, using the internal compass, maybe…"

"Hey,

Help needed!  Just finished updating my quad to Arducopter 3.1 rc7 and now my OSD is not displayed on my video feed.  Previously I was running 3.0.1 and the OSD was working perfectly.  I have checked the SR0 and SR3 parameters to match what…"

"Is there a param file for a Skywalker 2013 to load as a starting point?  Can the old param file for the skywalker be used for this new TECS firmware.  If anyone has tunned a Skywalker 2013 can you please post the param file or a list of the…"

"Here is the requested file, thanks for the help.ArdupilotPlanner.log"

"Does Ardustation Version 2.0.20 work on the Ardustation Mega sold by jDrones?  If so, where can I find an already compliled HEX file for the version?
 
Cheers"

"I am have a problem with Mission Planner, it works perfect until I close it.  When the "X" is pressed the MP window closes and the box pops up and says "Mission Planner has stopped working".  This happens everytime I close MP.  I am currently…"

"Need some help!
First flight this morning didn't end well!  I have flown my DJI 450 quite a few time testing Stab, Alt Hold, Loiter modes successfully.  This morning my goal was to test RTL.  I set RTL as the third mode switch and went flying.  Once…"

"How do I prefetch map files?  Or do I require a internet connection out in the field?
 
Cheers"

"have you solved this problem?  I am having the same issue with my 2.5+, in cli it says no data flash when it boots also when i do a test on "logging" I get the same, no data flash.  This first happened a few days ago, then went away......now the…"

"Hi,

Need a little help/advice.  I have been using 2.9/2.9.1 for a week or so now, only in Stab Mode.  I had come to the point where I wanted to look at my .log files to analyze the vibration readings before I tried AltHold Mode.  This is where I…"