About

Location

Virginia Beach, VA


About Me:

Hobbyist & Small Business Owner for Security Sales, Installation and Service.


Please tell us a bit about your UAV interest

Autonomous UAV Multi-Rotor and hopefully graduate to a super efficient fixed wing for FPV.


Hometown:

Virginia Beach


Activity Feed

Tom Miller replied to Tom Miller's discussion Octocopter 2.6 Motor #6 is weak
"Really!!!!....a little silent treatment!!.....I will give that a try and see if it works. Thanks guys!"
Dec 16, 2013
Tom Miller commented on Jeff L's photo
"how about them chemtrails!!"
Dec 15, 2013
Tom Miller replied to Tom Miller's discussion Octocopter 2.6 Motor #6 is weak
"I replaced the motor with a new motor (same make and model) I swapped motors
with a know good motor and replaced the speed control. I have also moved the suspect
motor to another esc. It seems to be something with the 6th channel on the receiver…"
Dec 14, 2013
Tom Miller replied to Ted Weerts's discussion Flies ok, then dips motor #4. Every Time.
"I have made three posts in regards to my situation without a single response. What is the trick?"
Dec 13, 2013
Tom Miller replied to Ted Weerts's discussion Flies ok, then dips motor #4. Every Time.
"I am experiencing similar problems, but my problem is on motor 6 on a octocopter. Motor is the last one to start spinning on throttle up and since it is on the back side of the copter I have to add forward pitch to keep level. I ahve changed motors,…"
Dec 13, 2013
Tom Miller posted a discussion
Motor #6 on my hexacopter seems to be weak or receiving a lower input from the controller that the rest of my motors. If I apply a little pressure to the prop cone I can stop the motor from spinning. This cannot be achieved on the rest of my motors.…
Dec 13, 2013