Gender
Male
About
Location
Brooksville, FL
About Me:
Retired, ex systems analyst. Hobbies include UAVs, precision airguns, and photography.
Please tell us a bit about your UAV interest
I've been in the hobby for about a year. Have a DIY "X" frame quad 680. It's the hands-on technical parts that I like the most.
Hometown:
Weeki Wachee
Activity Feed
"I assume this has already been discussed but, for the life of me, I haven't been able to find a way to search this forum's database.
I just completed an auto tune of roll and pitch. The results between roll and pitch are completely different, ie:
…"
I just completed an auto tune of roll and pitch. The results between roll and pitch are completely different, ie:
…"
Hello, I'm flying 3.2.1. My hex has a 3DR pixhawk installed. Accomplished dozens of flights with no problems. Then I replaced a 3DR LEA6H with a M8N. After the switch, the behavior of the hex changed:If I fly in a GPS controlled mode (Pos-Hold) and…
"If you haven't already, you need to go into the SCRIPTS folder on the SD card and change the sub-folder "model_name" to "Storfot"."
"Thanks Jan. I set it up and it works perfectly. For those that are wondering a status of disarmed is shown displayed by blinking the current flight mode in the header bar. The flight mode turns solid as soon as the bird is armed. Same with the…"
"First, thanks to all for the amazing work done on this project!
My question, can someone advise if there is a version of the software that provides data on the Armed/Disarmed state of the flight controller to the Taranis?"
My question, can someone advise if there is a version of the software that provides data on the Armed/Disarmed state of the flight controller to the Taranis?"
"I have Neo-M8N modules from 3 different manufacturers but have never been able to get any of them working even close to correctly. I've spent hours and hours browsing forum after forum trying to find someone who has been successful with the M8N. I…"
"Thank you. I'll definitely study your link."
"Thanks - I was in PosHold mode. I re-did my FC mount today. I'm using rubber balls - looks very promising."
I recently completed my hexacopter (Pixhawk, AC 3.2.1). Test flights in Stabilize, AltHold and PosHold were acceptable to me ( a beginner), other than the fact that every once in a while the copter would jump up 1 or 2 meters. These flight were all…
"Thanks, this points me in the right direction."
"Hi, sorry if this has already been mentioned - I couldn't find anything.
FrSky makes a number of sensors that attach to their SmartPort in a daisy-chain manner. Can anyone tell me if attaching their Vario or Voltage sensor, for instance, would…"
FrSky makes a number of sensors that attach to their SmartPort in a daisy-chain manner. Can anyone tell me if attaching their Vario or Voltage sensor, for instance, would…"
