"Hi all, did you successfully solve it? Tomas"

"Thanks, corrected .)"

"Hi, I just have my IRIS disassembled, so I took short video of cable's connection.
In fact, when you have camera facing to mounting plate, first front cable goes to first front pin on board.

KR, Tomas"

"Hi, on old IRIS's radio was ER9x firmware, so you might be good with this manual. KR, TomasER9x Users Guide.pdf"

"I can't compare, because I have no experience with Canon. But I guess option with connecting camera directly to Pixhawk, might be little bit more precise and little bit faster in work flow. On the other hand, so far I was satisfied with GoPro and…"

"Hi Jimmy,

with this setup you can use this method:
http://conservationdrones.org/geo-tagging-videos-and-photographs/
It can produce good results.

Tomas"

"Hi,

I had this problem on old 3DR IRIS in Stabilize mode, I didn't changed anything in mode settings and used the FlySky radio. It happened 3 times, always after auto mission (but I have also did successful missions and landing in stabilize mode).…"

"Wow, I don't understand, how I could missed that. It is exactly as you say.
So far I had three flipovers, everytime with broken props and it was everytime after landing in stabilize mode after auto mission.
How did you solve it? Are you putting land…"

"Hi, thanks a lot .)

Btw. In meantime I get burned under pile of failure messages. Do you have any idea, if it is possible to test Pixhawk HW health?

http://ardupilot.com/forum/viewtopic.php?f=100&t=11164"

"I am looking for 3 axis gimbal myself, I was using 2 axis tarrot, but yaw oscilation is real killer of any video.
Todd Harper recommend it to me, he used  it for video in this post. It is also lighter than DYS. I will try it."

"Have you considered Feiyu Tech 3G Ultra?"

"Nice. Btw. Have you already tried manual exposure with Hero4?"

"It might be power settings of tilt motor.

Check this pretty amazing video about tarot gimbal settings, https://www.youtube.com/watch?v=BwogodUlGAI"

"Be carefull while trying and check your settings for rc transmitter connection loss, I suggest RTL."

"You have to use mission planner."