"Did you get it to work on Linux ?
I always have the same error on the receiver side :
DLT_IEEE802_11_RADIO EncapSetting pipeline to PAUSED ...Pipeline is PREROLLING .../GstPipeline:pipeline0/GstH264Parse:h264parse0.GstPad:src: caps = video/x-h264,…"
I have the system working on my 250 FPV Racing quad !
I have a Pi A+ on the quad and an old Pi B as a receiver, both connected to the CSL 300, running on the same script as Fnoop Dogg.
The range is somewhere around 200m before the first…"
"Hey, exactly what I was planning to work on ! I already have the system working with two CSL adapters, I still need to do some range test, and maybe improve the latency which is currently about 250ms. Good antennas should be a part of the solution…"
Using your link, I have modify the sbus.c file in ArduCopter and it now works with 14SG and R7008SB :P
It works on both SBus and SBus 2 port, and in 14ch mode, with dual receiver support :D
How can I share this work to everybody ?
Hello guys,Here is a little video I would like to share with you. It's a promotion clip for a french company, specialized in machines recycling. We have been mandated to make this film with a little but very imaginative product company and here is…
"It works with one motor only. There is a central drive shaft, then one belt per rotor. It is pretty simple indeed, but the main gaol during design was the durability : it will survive to most of the crash without any damage :)
It works with the new…"
"Yes, this thing is going to be HUGE !
I have tried it at IRCHA and I loved it, I am the guy flying it from 1'30 to 1'40 :)
It should be available in September :) It was planned for end of August, but it has been delayed a little bit :/
I have my PX4 flying really well with AC 3.0.0 on an Octocopter. My only problem is with the ppm encore :/ I have heavy glitch as you can see on the log.
I use a Futaba receiver, R7008SB, and the ppm encoder because the SBus doesn't work, too…"