Gender
Male
About
Location
ANDHRA PRADESH
Please tell us a bit about your UAV interest
Autonomous Micro Air Vehicle
Hometown:
hyderabad
Activity Feed
"Hi,
Thanks for your immediate response...
Yesterday I did some workouts on this issue, I am able to import different modules into Mission Planner but the typical problem which I'm facing is, though I imported sys module but still it is showing an…"
Thanks for your immediate response...
Yesterday I did some workouts on this issue, I am able to import different modules into Mission Planner but the typical problem which I'm facing is, though I imported sys module but still it is showing an…"
"MHenry can you please tell me how to import pygame into mission planner, when ever I try i'm getting an error like "Error running script cannot import base from pygame", if you have any idea then please let me know.
-Thanks"
-Thanks"
"Hi Bob,
can you please tell me on which air frame you mounted your APM?? also can you please tell me the web page where I can get the above mentioned python scrip?
Thanks"
can you please tell me on which air frame you mounted your APM?? also can you please tell me the web page where I can get the above mentioned python scrip?
Thanks"
"In that code you have to add your own arming python script and for take off too. I did it with out props (if my copter is in roll then i can hear variation in motors RPM). can you please tell me on which multicopter model you are running all these…"
"Can you please tell me on which multi-copter model you are running all these python scripts? because I got control over APM2.5 with python but the problem is i'm not able to experiments on my 450 and 550 models."
"which multi-copter you are using?? I have both 450 and 550 models, but I never flew them with python. I need a small vehicle which can only carry my APM2.5 and 433MHz links."
"Hi, I have seen a hexacopter in this post. I built one hexacopter with DJI f550 motors, Turnigy Plush 30A ESC, APM2.5, APM Power Module. But the problem is my hex is crashing even I did all the tuning and calibrations perfectly. Please help me to…"
"Did you ever work with Way Point Navigation?? I tried several times with my both hex and quad-copters. I got good results with quad-copter but with hex-copter I dunno whats the problem but its all the time crashing. If you have any Idea please let…"
"Did you ever work with Way Point Navigation?? I tried several times with my both hex and quad-copters. I got good results with quad-copter but with hex-copter I dunno whats the problem but its all the time crashing. If you have any Idea please let…"
"Hi MHefny, Did you ever work with optical flow sensor?? I gave a trail with that, my quad was able to hold that particular altitude but its not holding Pitch and Roll. It is all the time moving here and there so if you ever work with OFS please let…"
"Today I tested it and got the positive result. I mounted APM2.5 on a quad-copter and I connected it with Mission Planner via telemetry link. Before flying I developed codes for Arming motors, throttle raise, stabilizing, roll, pitch, yaw, land and…"
"Today I tested it and got the positive result. I mounted APM2.5 on a quad-copter and I connected it with Mission Planner via telemetry link. Before flying I developed codes for Arming motors, throttle raise, stabilizing, roll, pitch, yaw, land and…"
"Today I tested it and got the positive result. I mounted APM2.5 on a quad-copter and I connected it with Mission Planner via telemetry link. Before flying I developed codes for Arming motors, throttle raise, stabilizing, roll, pitch, yaw, land and…"
"Till now I have not tested its max altitude, but I flown my quad copter at 10 feet height with optical flow sensor. Are you able to get pixels?? which optical flow sensor you are using??"
"Minimum 3 feet with good illumination. I placed dark patches on floor and tested it, it was locked altitude but not the roll and pitch(there was no aggressive motions in pitch and roll, so we can correct them on minutes basis)."
"Are you able to run your matlab code on APM2.5?? Is it giving any response?? Today I started working on mex matlab and mavlink. If you have any detailed description for how to proceed to use mex matlab and mavlink then please mail me. My Id is…"
