Location
New Brunswick
About
About Me:
Civil Engineer in training.
Please tell us a bit about your UAV interest
Aerial Mapping.
Hometown:
Moncton
Activity Feed
"Hi Rick,
Unfortunately I have not yet been able to fly a successful mission.
I still visit the flying field several times a week but have not been making much progress.
My current issue is that my copter does not seem to keep a proper bearing. …"
Unfortunately I have not yet been able to fly a successful mission.
I still visit the flying field several times a week but have not been making much progress.
My current issue is that my copter does not seem to keep a proper bearing. …"
"I did not see any information explaining whether the config files in the repositories are for APM1 or APM2.
This could become important in the near future. If I simply overlooked it please disregard.
Cheers"
This could become important in the near future. If I simply overlooked it please disregard.
Cheers"
"I experienced the same problem with 3DRobotics 20A ESC's.
The first time I experienced the problem I was worried I had a rogue cold solder joint and spent an evening isolating and cooling every component in the freezer. I narrowed it down to the…"
The first time I experienced the problem I was worried I had a rogue cold solder joint and spent an evening isolating and cooling every component in the freezer. I narrowed it down to the…"
"Thanks for the response.
I will patiently wait for the recommended configs."
I will patiently wait for the recommended configs."
Hi all, I have made several automated flight attempts without success. The copter performs as expected in other flight modes (Stabilize, RTL, Loiter, Alt_Hold). When I switch into Auto Mode, the copter usually begins yawing and seems to…
Hey all,I would like to share my experiences as a member of the DIYDRONES community. About 8 months ago I began working on my dream of a stable UAV platform for Aerial Photography. As a young Civil Engineer in training, the possible applications are…
"http://www.diydrones.com/forum/topics/rtl-issues?xg_source=activity
I had the same problem, not sure if you solved it.
Hope this helps."
I had the same problem, not sure if you solved it.
Hope this helps."
Hi all,I am currently experiencing a strange problem. When I try entering RTL mode, I am immediately switched to loiter mode.Here is a pic to illustrate: I have GPS lock and have set my home location.When I call upon RTL, my copter begins to loiter…
"Hi,
I assembled my PDB following an older version of Assembly Instructions. The older version of the Assembly Instructions was a) different or b) I followed the instructions wrong because during a rebuild, I noticed that the wires from pin 3 and 4…"
I assembled my PDB following an older version of Assembly Instructions. The older version of the Assembly Instructions was a) different or b) I followed the instructions wrong because during a rebuild, I noticed that the wires from pin 3 and 4…"
