Gender
Male
About
Location
Hampshire
About Me:
I am a mechanical engineering manager with a keen interest in RC helicopters.
Please tell us a bit about your UAV interest
Signed into the aeroquad forum with a view to building my own quad copter and my interest has grown with the developments between DIY drones and aeroquad into building a quad copter with the ardupilot system
Hometown:
Southampton
Activity Feed
"Hi a short video showing the minimOSD on my quad.
MinimOSD test from wayne_h on Vimeo."
MinimOSD test from wayne_h on Vimeo."
"Hi Olivier, I have read some good reports on V2.46 I have tried it twice now and have found it very dificult to fly (I thought it was just me). The dead zone on the controller feels too wide and my quad is very unresponsive, there were a lot of…"
"Hi, I loaded .42 from the mp last night set up in the usual way but I am getting a funny thing happening with the modes. The mp will not save the modes I have set (modes failed to save) and seems to put in random modes, sometimes these change when…"
"Hi Jason, Please could you put a copy of 2.0.37 in the download section. My IMU is mounted in between the front arms and that option isn't supported in the APM and if it is I don't now how to change it. I still use arduino and set up manually.…"
"Hi Jason great work you are doing. I don't even have time to test a revision before there's another one to try. Everything has been working well on the default I couldn't believe how good alt hold was on 2.032-3 working really well on default pids.…"
"I have the same problem approx 7 degrees out and high. looks horrible but flies good even in alt hold. Is there anywhere in the GCS code where we can change the angles so that the artificial horizon is level or is it a set up problem with the quad?…"
Hi, I have a problem with the sonar altitude hold. I am running AC2.0.20 with default pids and the quad is in stable mode and is rock steady, when I engage alt hold at about 10 ft it holds really well within 6-12 inches. I turn off alt hold, do a…
"Hi everyone.Great work Jason thanks for all your hard work. Just loaded the AP2 code went through the set up in CLI activated sonar and mag went into the test menu and sonar was missing. I have tried it a couple of times with the same result any…"
Hi, I'm just about ready for my first test flight of my arducopter (custom frame with the APM & IMU no GPS or magnetometer) just waiting for some decent weather, so I have been testing my set up in the configurator everything seems to be ok but when…
"Cenk, I have an option to put a lock on the frame if needed and I can adjust the tension on the clips and the hinge to give a stiffer set up if required but I figured that if the props are pushing up and all the weight in the centre is pushing down…"
"Weight including 2 batteries and esc's, rx etc. is 1.48 kg. The 4 booms are from a trex 500 clone 16mm o/d x 15mm i/d, clips and posts are from RS components everything else is custom."
"Hi everyone, I have been following the progress of the arducopter for a while now. it's a great project and a big thumbs up to all the developers and community members. I have designed and built my frame which is foldable and should fit in a 450…"
