Gender
Male
About
Location
Calgary, Alberta
About Me:
I am an R/C modeller with an electronic background and would like to learn the UAV.
Please tell us a bit about your UAV interest
I like to learn about UAV as this is a challenging hobby and also requires electronics which is also my hobby too.
Hometown:
Calgary
Activity Feed
"I am not sure if the arduino really emits the correct PWM signal as your transmitter, but if I were you, I would do it from the actual transmitter that I am going to fly the uav with. "
"Have you calibrated your ESC? Check the manual of the ESC, there must be instruction how to calibrate the ESC."
"Hi Bill,
thank you for your response. I have installed the daily build you mention above (apm_planner_2.0.15-69-g33d0567_osx.dmg), but it seems the problem is still there.
Please see the image attached. The missing section of the map is the same…"
thank you for your response. I have installed the daily build you mention above (apm_planner_2.0.15-69-g33d0567_osx.dmg), but it seems the problem is still there.
Please see the image attached. The missing section of the map is the same…"
Hi,I have problem with APM Planner 2.0.15 on Mac OS X Mavericks. I played the other day about saving map portion into cache. But now my map does not want to load the map even online. This only happens to some zoom levels and only on some areas. How…
"Hi Kieran,
thanks for the link. Unfortunately the link only explains the beep patterns of the Pixhawk and LED blink patterns of the APM, but not the beep pattern. If you know another resources regarding this issue, I would really appreciate if you…"
thanks for the link. Unfortunately the link only explains the beep patterns of the Pixhawk and LED blink patterns of the APM, but not the beep pattern. If you know another resources regarding this issue, I would really appreciate if you…"
"Hi again,
ok, this time I connect to the APM via the terminal using the USB cable. It improves a little bit on the screen which prints some readable texts, but the terminal does not respond to any keyboard input. (Please see the screen capture…"
ok, this time I connect to the APM via the terminal using the USB cable. It improves a little bit on the screen which prints some readable texts, but the terminal does not respond to any keyboard input. (Please see the screen capture…"
"Kevin,
what software does your friend use to open the schematic files?
Thanks in advance.
Regards,
Jo"
what software does your friend use to open the schematic files?
Thanks in advance.
Regards,
Jo"
