About

Gender

Male


About Me:

From belgium


Please tell us a bit about your UAV interest

Arducopter


Activity Feed

Willems Helmut commented on Vincent Mees's blog post Arducopter with Xaircraft X650 value frame
"And only cut when motors are disarmd"
Oct 29, 2011
Willems Helmut commented on Vincent Mees's blog post Arducopter with Xaircraft X650 value frame
"Mb interrupter AB to relay of the imu board. So you can give the esc's power on distance :-)"
Oct 29, 2011
Willems Helmut replied to Jason Short's discussion Arducopter 2.0.48/49
"i have open a topi with a problem , but i think that i found a bug at the planner in combination with .49
http://diydrones.com/forum/topics/strange-alt-hold-simple"
Oct 23, 2011
Willems Helmut replied to Willems Helmut's discussion strange Alt-hold & Simple
"I found it , and i think that this is a bug in the APM Planner
 
i thought that i activated the mode Alt-hold but is was RTL ( i read this with the CLI)
Other mode i choose in the planner is Simple(it's there) but in real i activated Alt-hold.
i…"
Oct 23, 2011
Willems Helmut posted a discussion
today i flew with my copterLucky my wife was filming.So , alt hold was not working , and now simple also notBefore i can tell simple was working 100% . Hold height but not now.what can be wrong ???
Oct 23, 2011
Willems Helmut commented on Max Levine's blog post ArduPilot/Copter Mega 6 position 'mode' switch for FlySky/Tunigy 9x/ and others.
"try only to help . . .
can you pm me the ebay link (so we don't promote someones prodcut) , will have a look maybe  we don't talk about the same switch"
Oct 18, 2011
Willems Helmut commented on Max Levine's blog post ArduPilot/Copter Mega 6 position 'mode' switch for FlySky/Tunigy 9x/ and others.
"i have also bought the swicth few months before.
i can tell you it works right out the box , but you have only to 
recalibrate your TX "
Oct 18, 2011
Willems Helmut replied to John L.'s discussion ArduCopter Mission Planner 1.0.68
"i have noticed also the same , updates , menus
connection with the copter.
everything really slow"
Sep 17, 2011
Willems Helmut replied to Willems Helmut's discussion Again my copter doesn't go up :´-(
"Alright ,
 
placed new legs , new props and look . . .
it goes up with a little drifting.
Wich is the best logging to avoid drifting ???
Also i can't hover , if i go up and leave the stick is goes down immediately.
So wich logging is the best to…"
Sep 12, 2011
Willems Helmut posted a discussion
i'm started with arducopter 8 months ago , and it's neve goes fine. Today i replaced new motor's and props and i can't go up the same issue like some months before copter goes to back ar backleft. my setup 4 x KD2217 motor4 x  10x4.5 propsX modeESC…
Aug 28, 2011
Willems Helmut replied to Matt Gaige's discussion 2.0.39 Available
"have the same problem like others here.
Sonar = 137 no other value"
Aug 18, 2011
Willems Helmut replied to Johann Van Niekerk's discussion ArduCopter first flight and crash.
"Seem johannesburg = -18

But that can't be the problem

Don't see the video"
Jun 12, 2011
Willems Helmut commented on Michael Oborne's blog post New! APM Planner 1.0
"ok , found it . thanks"
Jun 5, 2011
Willems Helmut commented on Michael Oborne's blog post New! APM Planner 1.0
"This look great , today i looked at openpilot and dream about a GUI like that , and look after 2 hours my dream come true.
 
The only thing i miss , is the graphic output of the transmitter .
otherwise it's really fine"
Jun 5, 2011
Willems Helmut posted a discussion
Hey ,Is there a place where the description is to use auto trim function ?Don't find it . . .
Jun 5, 2011
Willems Helmut commented on ARHEXA's blog post 6 POS Mode Switch
"Look


Quantity:
More than 10 available
On ebay , already 9 sold BUT backorder time of 14 days ??? Strang way of bussiness"
Jun 3, 2011
More…