About

Location

Rexburg, ID


About Me:

Lives in Idaho


Please tell us a bit about your UAV interest

Hobby and for video production, am also incorporating aerial video into the production. Some of my videos found at youtube.com/andrewluisbaker. Along with facebook.com/andrewvideobaker


Hometown:

rexburg, ID


Activity Feed

andrew commented on Andreas's blog post RCTimer Brushless Gimbal and Controller
"Thanks Andreas!"
Jun 13, 2013
andrew replied to David Haslehoff's discussion Does a low cost FPV/Aerial photography/long range kit exist?
"I also need help for upgrading parts or if i'm doing it wrong or right for aerial video productions/photo, here is my set up:
http://diydrones.com/forum/topics/multicopter-not-lifting-too-heavy...

I have similar wants."
Jun 13, 2013
andrew replied to Kerem Etes's discussion Could you please give me some advice?
"I also need help for upgrading parts or if i'm doing it wrong or right for aerial video productions/photo, here is my set up:
http://diydrones.com/forum/topics/multicopter-not-lifting-too-heavy..."
Jun 13, 2013
andrew replied to Dustin's discussion Heavy Lift & High Altitude
"I also need help for upgrading parts or if i'm doing it wrong or right for aerial video productions/photo, here is my set up:
http://diydrones.com/forum/topics/multicopter-not-lifting-too-heavy...

I would like to heavy lift and stable in high…"
Jun 13, 2013
andrew replied to Aaron Lauzier's discussion Heavy Lifting Hexacopter for Aerial Photography
"I also need help for upgrading parts or if i'm doing it wrong or right for aerial video productions/photo, here is my set up:
http://diydrones.com/forum/topics/multicopter-not-lifting-too-heavy..."
Jun 13, 2013
andrew replied to Tibor Szarka's discussion Commercial aerial photography using APM 2.5
"I also need help for upgrading parts or if i'm doing it wrong or right for aerial video productions/photo, here is my set up:
http://diydrones.com/forum/topics/multicopter-not-lifting-too-heavy..."
Jun 13, 2013
andrew replied to SkyHiEye's discussion New to Aerial Photography. Need help selecting start-up equipment
"I also need help for upgrading parts or if i'm doing it wrong or right for aerial video productions/photo, here is my set up:
http://diydrones.com/forum/topics/multicopter-not-lifting-too-heavy..."
Jun 13, 2013
andrew posted a discussion
(AERIAL VIDEO PRODUCTIONS)For heavy lifting, on the low budget.What is the best way to upgrade this?Specs:apm 2.5 control boardAPC 10 inch propsDJI 550 frame3drobotics 850kv motorsrctimer 30a esc Simon K flashedbatteries 2200mah 3s 30-45cgimbal…
Jun 12, 2013
andrew commented on Andreas's blog post RCTimer Brushless Gimbal and Controller
"What is the best way to upgrade this?

Specs:

apm 2.5 control board
APC 10 inch props
DJI 550 frame
3drobotics 850kv motors
rctimer 30a esc Simon K flashed
batteries 2200mah 3s 30-45c
gimbal attached to hexacopter
recommendations? Once gimbal was…"
Jun 12, 2013
andrew commented on Andreas's blog post RCTimer Brushless Gimbal and Controller
"That being said (wobble/bounce) possibly other vibration solutions that are better, anyone?
Regardless of these things, rock on gimbal for the price and the board isn't too bad either.  I haven't tried to tune the settings yet, or are there other…"
Jun 3, 2013
andrew commented on Andreas's blog post RCTimer Brushless Gimbal and Controller
"Also at least for me regarding this gimbal, it seems that the only good footage with my quad is when I am actually moving and not hovering, guess it would be different when I put it on my hexacopter....we will see, soon to have 30a SK flashed on…"
Jun 3, 2013
andrew commented on Andreas's blog post RCTimer Brushless Gimbal and Controller
"Great!  I'm just worried about the voltage i'm putting out to it is only 7.4v instead of 11.1.  I have built the gimbal and it's nice! Used a 2200mah 3s 11.1v Lipo battery, just wondering if using the one I posted last would work considering the…"
Jun 3, 2013
andrew commented on Andreas's blog post RCTimer Brushless Gimbal and Controller
"http://www.amazon.com/Venom-1320mAh-LiPO-Battery-Plug/dp/B0027G874G...

Would that work. What is the min and max voltage for that guy?"
Jun 3, 2013
andrew commented on Andreas's blog post RCTimer Brushless Gimbal and Controller
"Thanks!"
May 25, 2013
andrew commented on Andreas's blog post RCTimer Brushless Gimbal and Controller
"What battery do you use for that gimbal, forum set up anywhere? I have yet to find that.
Possibly battery solution: 800mah 2s 20c battery?"
May 25, 2013
andrew replied to Randy Burkamper's discussion APM 2.5 Power Light
"SOLUTION FOUND! 
I looked around and saw that other had the same problem.  On other forums there is an issue with the 3.3v Voltage regulator on the board, which makes the APM 2.5 faulty.  I emailed 3D robotics and they said that with the tests I…"
Mar 26, 2013
More…