Gender
Male
About
Location
Bonn
About Me:
flying the following FPV models: - TBH aglity - TBH PolyStyro - TBH GreenHornet - TBH OctoXXL - DeX Mini Quad (waterproof) - HK Phoenix 2000 - HK Kinetic
Please tell us a bit about your UAV interest
Just love to see the world from above =)
Hometown:
Bonn
Activity Feed
"I do not want to sound disrespectful but I wonder if there is indeed a working prototype that can fly? All pictures I see on the website are just mediocre renderings and the only video on the site showing the real thing does not show it in action.…"
"Short update: The co-processor was indeed the problem. When flashing new firmware both the main-processor and the co-processor get updated. Somehow the updated for the co-processor failed resulting in a broken RC-input. Flashed the co-processor…"
"I have once more contacted 3DR support and told them, that obiously there is a problem/incompatibility 3DR knows of but does not want to admit. Otherwise the 3DR support engineer would not have been able to tell me spot on the last version of…"
"fred... obviously only specific board revisions are affected. Most Pixhawks work fine with the latest software unless you have bad luck and have one of those intermediate board revisions (2.3, 2.4, 2.4.3, 2.4.5... don't know for sure yet which…"
"Hi there,
we've recently had the same problem like the thread opener. After the update to arducopter 3.2.1 there was nomore PPM-input signal visible in Mission Planner. We've contacted 3DR support and asked them to replace the board.
- We tried…"
we've recently had the same problem like the thread opener. After the update to arducopter 3.2.1 there was nomore PPM-input signal visible in Mission Planner. We've contacted 3DR support and asked them to replace the board.
- We tried…"
"This fellow seems to have a similar Problem (Autotune not engaging) :
http://diydrones.com/forum/topics/autotune-not-engaging
Can someone please help on this topic?
Best regards
Thomas"
http://diydrones.com/forum/topics/autotune-not-engaging
Can someone please help on this topic?
Best regards
Thomas"
Hi there, tried to "autotune" PIDs on my Pixhawk which is configured to drive a V-Tail Quad. The V-tail Quad flies quite ok already but sometimes it behaves a bit unstable/nervous in the air - that is especially when it's getting hit by wind…
"Hi JD,
is there a way to also program "MavLink"-independed blink-pattern? Could you please point me to the right direction? Thank you!"
is there a way to also program "MavLink"-independed blink-pattern? Could you please point me to the right direction? Thank you!"
"@McCray: Problem with ceramic bearings is: Their specs only allow very low RPMs (about 2000-5000rpms - that is way to low for a multicopter) + they are expansive like hell + it is difficult to get very small ones e.g. for motors in the 220x class.…"
"I did exactly that - WD40 on the upper bearing (you can't reach the lower bearing though).... and after each flight wash the copter in a padding pool full of sweet water... I even dipped the complete copter unter water and let the motors run at full…"
"BTW: here is some footage from the waterproof -> then rust copter: https://www.youtube.com/watch?v=vQifSFIxjlg&list=UUNVj3iwV6w1SL... -- The fun start at 2:00min -- enjoy, leave a comment, like or subscribe"
"The idea of a waterproof BoxCopter is indeed nice and it really works quite well (yes i built one) - there is only one big problem that has yet to be solved: The motors are still exposed to the water. This is no pronlem in the first place since they…"
"Hi there,
has anyone wired up the RCtimer Annunciator yet? (http://www.rctimer.com/product_1107.html)
Why the heck does this thing have 4 LEDs? As far as I understand this Mod shows just Arm and GPS status.. so what's the other LEDs for? Next:…"
has anyone wired up the RCtimer Annunciator yet? (http://www.rctimer.com/product_1107.html)
Why the heck does this thing have 4 LEDs? As far as I understand this Mod shows just Arm and GPS status.. so what's the other LEDs for? Next:…"
"Hello Mike,
I am also interested in this project very much. As of now I've simulated the Easystar with Aerofly Deluxe but the simulation is not that precise. The simulation-engine is obviously not that good. Looking forward to do sime testflights…"
I am also interested in this project very much. As of now I've simulated the Easystar with Aerofly Deluxe but the simulation is not that precise. The simulation-engine is obviously not that good. Looking forward to do sime testflights…"
