Hello,guys, hoping your help.Not everytime,but frequently after the QuadPlane fly to a certain level(always some meters) in Qloiter mode, ardupilot will slowly decrease the output of RC5/6/7/8,and so plane fall on floor.…
Hello,friends.My plane is about 5.5kg, wingspan 1.8m.Firmware 3.5 As below 。The altitude fluctuating more than 10m .Here is my test,the designed altitude below was 100m.It flies well in FBWA mode, maintain the airspeed well, hit the flight course…
"Hi,Andrew Tridgell ,I also have a serious problem ablout the altitude maintaining,Hoping your help!
My plane is about 5.5kg, wingspan 1.8m.Firmware 3.5As below
The altitude fluctuating more than 10m .Here is my test,the designed altitude below…"
"thanks,iskess . my plane is like skywalker,the conventional configuration,and 2 months ago,It works well and hit the line well.Full para"PLANE" in the attachment, thanks.Does this problem probablly cause by the bad gyro or compass?
Another…"
"thanks,iskess . my plane is like skywalker,the conventional configuration,and 2 months ago,It works well and hit the line well.Full para inplane.paramautotakeoff.param"
Friends, Today I test the auto survey function, but I found the plane didn’t fly the exact way which I plan. I don’t know how it happen.As shown below ,the plane didn’t hit the waypoint 1 ,but the plane maybe think it did hit the point 1 and fly to…
"Hi, Oborne,thanks for your reply.
Anther question please, Today I test the auto survey function, but I found the plane didn’t fly the exact way which I plan. I don’t know how it happen.As shown below ,the plane didn’t hit the waypoint 1 ,but the…"