About Me:
Play Hard Pay Hard, Some one that likes technology,
About
Please tell us a bit about your UAV interest
I would like to be able to incorporate this into the type of work I do.
Hometown:
SF Bay Area
Activity Feed
"I think you are right my biggest problem is going to be the twisting of the frame. I mite run some aluminium rods down the sides with bulkheads in the front and rear to reduce some of the twisting"
"Great thanks for the video link. That is help full"
"Thanks for the info on the clamps. I will weigh it and let you know."
I just started a new project in building a new quad frame for under $10. I started with 2" black PVC pipe and .75" white PVC. Cut all the parts to 18" and the legs at 5.5". I could use some suggestions on how to mount the motors. I have a old x525…
"If you want a start button on Windows 8 you do not have to pay for it you can use Classic Shell for free or donate if you would like. Link http://www.classicshell.net/"
"Great job can't wait to try it
Thank for your hard work"
Thank for your hard work"
" You could reduce some Weight with removing the magnets. I am not a big fan of the laser pointer. Reduce the overall height and diameter. Looks like a great product good luck. "
"Thanks I like. I should be able to mod it"
"Who makes that unit do you have a link
Thanks"
Thanks"
"I did not see your post until today but i am in the same boat. If you get it fixed i would like to know how you do it.
Thank you"
Thank you"
I damaged my APM 2.0 in a crash. The unit appears to operate fine but the GPS antenna came off. 3D Robotics does not do repair's and recommended removing or cutting the trace on it. I do not know how to do ether of toughs. I am looking to the…
"I have found the KK board to unstable for the type of application I am going use it in. I now use a APM 2.0 on a DJI frame with 11X4.7 Gemfan props. I started out using a KK board with X525 frame I spent more time picking up parts from all…"
