Hi all,A few weeks ago I was having arming issues and while trying to fix them, I reformatted my pixhawk’s SD card on my desktop. The “Download DataFlash Log Via Mavlink” log downloader menu gives an output after clicking “download all logs” of…
"Sorry for the spam if you're still getting emails for this but I think i found something that could be the problem with the RC not calibrating... the channel trim value is lower than the lower limit... is this where the problems are coming from?"
"Reformatted the SD card with FAT32 (was checked by default) and the error message disappears... if i eject and replug into the computer, no error messages. Eject, put into pixhawk, power it, unpower, and plug into the computer... the SD card is…"
"Advanced view is checked, parameter tree is no different. Plugged SD drive into computer to see if it was logging the attempts to calibrate esc's like in the video and the disk is corrupted and cannot be read. Also, in the calibration, when the USB…"
"I don't have an option to open a LOG tree... and when i put in the 131070 value, wrote it, unplugged usb, replugged, connected mav, the value was set to 0... not sure whats going on. log1.jpg"
Hi all,Brand new, learning quickly, and very excited. I've got a pixhawk board v3.3.3, mission planner 1.3.39, taranis transmitter, and the X8R receiver running PPM out of the SBUS port. The transmitter has 5 channels set up, throttle (1), roll (2),…