Gender
Male
About
Location
wauchope NSW
About Me:
im a 23 yr old Computer tech
Please tell us a bit about your UAV interest
been flying rc for afew years now and very keen to get an eye in the sky
Hometown:
Wauchope nsw aus
Activity Feed
"Pretty interested in this , i started flying cleanflight as i got sick of being limited to a 8bit board for the miniquads but now things have changed alot and i feel i can try apm once again for acro flying :) will be watching this closely. also…"
"interesting indeed , ive been thinking about re-trying the apm in a 250 now i know what a good flying mini feel's like but yes oneshot is needed for us crazy acro guys!
the real issue atm for me is size , i have a micro apm but being 8bit and at the…"
the real issue atm for me is size , i have a micro apm but being 8bit and at the…"
"hello again :) thanks for the reply
its a micro apm 2.5 so there is no EKF enabled & the baro is covered however INS_MPU6K_FILTER is set to 98khz and i think that effects the baro?"
its a micro apm 2.5 so there is no EKF enabled & the baro is covered however INS_MPU6K_FILTER is set to 98khz and i think that effects the baro?"
"good to hear mate , ive seen people give up on apm for there mini as they thought it couldnt get faster glad you questioned it :)"
Hello im looking for some help going through a log "file attached" from a crash in acro were it felt like i just lost control after two roll'sthe frame it a 250 ZMRHK micro apm on 3.2.1 stable with custom s.bus code on the atmel 32UMT2206 2000kv…
"yep u sure will , i found with the minis that pids needed to go down about 30% from stock however you may experience wobbles when you throttle up hard and this is unavoidable till we get TPA in arducopter."
"Ive had it up as far as 13 on my 250.
i did have a unexplained crash today with it set to 11 however i feel its not related to this setting but something else , about to post my logs and hope to find out but the basics are i did two rolls then it…"
i did have a unexplained crash today with it set to 11 however i feel its not related to this setting but something else , about to post my logs and hope to find out but the basics are i did two rolls then it…"
":) looks like we are making some progress on TPA for us mini guys
https://github.com/diydrones/ardupilot/issues/1261"
https://github.com/diydrones/ardupilot/issues/1261"
"Ok i need some calcification.
What is missing from the files on Thingiverse?
What do you get if you pay for the files other then a part list of hardware?
Any advice would be great :)"
What is missing from the files on Thingiverse?
What do you get if you pay for the files other then a part list of hardware?
Any advice would be great :)"
"Great stuff , really thinking about using this even for my "hobby" activitys for battery monitoring "
"Ok thought id post this to help anyone else wishing to update there PPM encoder
Jump to Ground
Then short these pads for a second to force it into dfu mode for flip"
Jump to Ground
Then short these pads for a second to force it into dfu mode for flip"
"Got mine afew days ago , alot smaller then you think when you get it in hand.
also Hobbyking are currently in breach of creative commons license as there is no Cad files in there files section
this disappoints me as i plan on upgrading the ppm…"
also Hobbyking are currently in breach of creative commons license as there is no Cad files in there files section
this disappoints me as i plan on upgrading the ppm…"
"Thats alot of connectors for S.port , can the pixhawks uart invert and does it support single wire serial ? if not im sure we could get in down to a 4.7k resister and a cheap inverter cable , i plan on adding S.port and Jeti Duplex telemetry as soon…"
Just seen our friends over at HobbyKing have released some new hardware focused toward the mini guysMicro APM 2.7 (above)Micro HKPilot OSD (below)Micro Telemetry radioOr just get the whole SetThe Micro HKPilot Mega master set is a complete open…
"could you upload your mission and a log?"
"Great to see some local's giving it ago , good on ya mike :)"
