Gender
Male
About
Location
Mercedes, Buenos Aires, Argentina
About Me:
I flyed RC since 1983 and helicopter since 1996, one month ago I bought one ardu pilot APM2 and I am really enjoy all the test I am doing. I am planning to buy a camera for my Hawk Sky in the short time
Please tell us a bit about your UAV interest
I would like to learm more about all the ardu pilot functions
Hometown:
Mercedes
Activity Feed
"Thank you so much... I was in simple.... Best regards, Leopoldo"
"Hi Brian, I have forgotten to thank you, I did it and it works great!!!!! Thank a lot!!!!"
I have one Quadri with a pixhawk, the board if oriented with the nose of the quadri.Something strange is happening, when I fly with the nose in the front and I push forward the pitch stick it is ok, then I turn to the left 90Degres, so the nose is…
Hello folks, I wonder how I can improve my plane parameters to avoid what I show in the drawing. The plane reaches the waypoint and then flies to the other and that makes the wind move the route. What should I adjust to the plane so before reaching…
Gentlemen I want to share my last experience with a 2.6 APM. I have used APM board since 2011 in some Hex, qua and airplane. Last week end I was using my hexa to take photograph for a farm. The hexa flew perfect in auto taking the photograph of 35…
"Hello,
I have three AP; one 2.0, another one 2.5 both are from 3DR for my aeroplane and copters and one 2.5 from chine that I used to run some tests
Two month ago I burn the 3,3 regulator of the chine one I read the topic with the procedure to…"
I have three AP; one 2.0, another one 2.5 both are from 3DR for my aeroplane and copters and one 2.5 from chine that I used to run some tests
Two month ago I burn the 3,3 regulator of the chine one I read the topic with the procedure to…"
"Hello,
I have three AP; one 2.0, another one 2.5 both are from 3DR and one 2.5 from chine that I used to run some test
Two month ago I burn the 3,3 regulator of the chine one, so I read the topic with the procedure to change it and did.
When…"
I have three AP; one 2.0, another one 2.5 both are from 3DR and one 2.5 from chine that I used to run some test
Two month ago I burn the 3,3 regulator of the chine one, so I read the topic with the procedure to change it and did.
When…"
I have problem with my APM 2.5 When I connect it with USB to PM I can download some ardu plane firmware with no problem, like 2.74. When go to Flight data screen and move the APM the HUD did not move. The wireless telemetria conection % goes from 0…
"Hi Tridgell, congratulations to you for this new outstanding development...
I have one question: for those who has not installed airspeed sensor yet, Could we use the new cruise fly mode also?.
Thank a lot"
I have one question: for those who has not installed airspeed sensor yet, Could we use the new cruise fly mode also?.
Thank a lot"
"What cable should I use to connect it in APM 2.5? and in which port the old one or the new one?, Thank a lot."
"Folks I have a doubt about a problem during a flew test yesterday.
If you see the data I switched the fly mode from auto to RTL ( lime 16222 of txt document). The plane ( HK 1.8 mts) did not came back to the home, it start to do something like a…"
If you see the data I switched the fly mode from auto to RTL ( lime 16222 of txt document). The plane ( HK 1.8 mts) did not came back to the home, it start to do something like a…"
"I have an issue with APM 2.0 and RTL mode during a failsafe.
I want to by pass the circle mode in order to move from any fly mode to RTL as soon as I have a failsafe event instead of passing through cycle mode..
I could not find the way to do it.…"
I want to by pass the circle mode in order to move from any fly mode to RTL as soon as I have a failsafe event instead of passing through cycle mode..
I could not find the way to do it.…"
"I was doing the last check in my house before test the 2.73 release and I have noticed in MP that there was problem with the level.
I connect the APM with MP and the level moves until it keep in the following position although the plane was in…"
I connect the APM with MP and the level moves until it keep in the following position although the plane was in…"
"Hello,
I was checking all the function with release 2.73 and I have one question about failsafe.
I remember that there was an option in the Mission planer where you could set up a short failsafe option (1sec) that change your fly mode to RTL in…"
I was checking all the function with release 2.73 and I have one question about failsafe.
I remember that there was an option in the Mission planer where you could set up a short failsafe option (1sec) that change your fly mode to RTL in…"
"Do you know if same app for IPad was developed also?"
"Hi,
I have uploaded 2.72 release, in case that I would like to come back to 2.68 release again, what should I do?.
Is there any speciall procedure or we can do it from the mission planner, firmware screen choosing the 2.68 release
Thank you."
I have uploaded 2.72 release, in case that I would like to come back to 2.68 release again, what should I do?.
Is there any speciall procedure or we can do it from the mission planner, firmware screen choosing the 2.68 release
Thank you."
